Search results for query: *

  1. N

    I’m looking for $800 US. I know there’s some cheaper units out there but I’ve got everything...

    I’m looking for $800 US. I know there’s some cheaper units out there but I’ve got everything that’s required to install on an A body. Bought the shifter decades ago then bought the mounting plate, shift boot, linkage rods and trim pieces all new. That’s why I’m asking what I am. If your still...
  2. N

    [WANTED] A body in-line 4 speed shifter

    Afternoon, I have a complete Mr. Gasket Vertigate set-up for an A body. Trim ring and Center pieces still have the plastic wrap on them.
  3. N

    [WANTED] 3/8" OEM fuel sender

    Hey Righty, don’t believe Mopar used a 3/8” line. On my sendinit, I solved my problem by prebending a 3/8 line to match the factory 5/16, cut the old one off the sending unit, drilled the plate for 3/8 and soldered in the 3/8 replacement line, both sides. No issues and you keep the OEM...
  4. N

    brand new bushed lower door hinges "cheap"

    Hey Mike, thanks for the come back. I’ve done my hinges, the car is off the rotisserie and blocking continues (Argg) Reassembly and alignment next. These looked like a viable option to a complete re&re on the hinges. Nice thing about FABO, lots of ideas and advice. Thanks
  5. N

    brand new bushed lower door hinges "cheap"

    Wow... pretty quick on the response Matt, appreciate! Was there an issue with the hinges that changed your mind?
  6. N

    brand new bushed lower door hinges "cheap"

    Helloooo.... just wondering if I can hear/see (pics) of how these hinges actually end up fitting, as in do they throw off the door alignment. I know the threads old, but hoping lol. Thanks
  7. N

    [FOR SALE] 8 3/4 3.91 sure grip section, M1 Magnum intake, Mopar Intake, 1350 8 3/4 kit, other stuff

    Hello, it appears your inbox is full. I’m inquiring about the pinion yoke if it’s still available. Thanks
  8. N

    Drip Rail Trim corner differences

    Thx OMM, I have a set off a hardtop but just trying to make sure before I have a go at putting them on the sedan.
  9. N

    Drip Rail Trim corner differences

    I Know the A-pillars have a different angle between sedan and hardtop, does anyone know for sure, if the “corner” drip rail pieces are different from sedan to hardtop as well? Thx guys
  10. N

    [WANTED] 67 Cuda Rad Cradle

    Hello, are you talking about the lower curved piece under the rad?
  11. N

    [FOR SALE] 1967 Dart GT Parts Fenders/Trim

    Thanks for the reply, cheers!
  12. N

    [FOR SALE] 1967 Dart GT Parts Fenders/Trim

    G’day, a little off topic, trim wise.... Do you happen to have any rear 67 wheel lip trim? Neverdone
  13. N

    Door beltliner for valiant 68 2dr?

    No prob! I’m finding with these cars, you have to improvise a bit if you need a part or 2..... lol
  14. N

    1968-69 Dodge Dart Hardtop Door Latches - Same for both years? Or different?

    Sorry for the response delay. 68 door has the lock knob at the rear of the door, 69 is forward.
  15. N

    1968-69 Dodge Dart Hardtop Door Latches - Same for both years? Or different?

    Ocdart, I myself have a 69 Valiant sedan, what I found is I have a 68 & a 69 door. The doors had different latchs, my brothers 68 Dart had the same latch as my 68 door so I’m assuming there is a difference between the 2 years.
  16. N

    Door beltliner for valiant 68 2dr?

    Good morning MrCronic... I have a 69 post car, I ended up “borrowing” my brothers Dart beltline moldings for an approximate lol. They dropped right into place! I ended up getting a set from a Dart hardtop and so far.... all good
  17. N

    [SOLD] Parting out Darts

    Lol, I just should have asked if it’s the old style.
  18. N

    [SOLD] Parting out Darts

    Hey was wondering how the rear wheel lip trim looks on that 67. Thanks
  19. N

    Vent Window Rivet on Upper Pivot

    Nah... they are pretty pitted, or I would consider rubbing them. And yes, stainless comes in 2 different formulas
  20. N

    [WANTED] Vent Window Upper Hinge Pins

    Not a problem! I’ll PM ya at the end of the wk. Thx
  21. N

    [WANTED] Vent Window Upper Hinge Pins

    Just a feeler seeing if anybody has these pins that rivet onto the frames. I believe 67 up are all the same, but correct me if I’m wrong. Thx
  22. N

    '72 Duster Hood Hinges

    Jim, I’m looking at the same issue myself. I’ve found some bushings with a flange on them that I’m going to slide over the pins, cut to a length so that I can install the star washer & keep the hinge assembly from walking on the bushing. Only concern is I have to drill the hinge holes out an...
  23. N

    Vent Window Rivet on Upper Pivot

    Murray... How did that turn out & is it holding up ok?
  24. N

    Vent Window Rivet on Upper Pivot

    Maybe I’ll try the Wanted ads. Ya never know.... lol
  25. N

    Vent Window Rivet on Upper Pivot

    Thx guys. I didn't find anything on the net so I figured this would be the best place to ask. Thinking of just doing the pin in black seeing as it’s almost covered by the rubber.
  26. N

    Vent Window Rivet on Upper Pivot

    G’day all, my riveted upper pivots are hurting! Chrome wise. Does anyone know of a source for just the upper rivet on pieces? Thanks,
  27. N

    69 Valiant 2 Door post door skins

    Jo Jo, I just measured my bro’s 68 Dart ht doors vs my 69 sedan doors. They appear to be the same. On a side note... about a month ago on Kijiji in Manitoba if I recall (search all of Canada) there was a set of sedan doors for sale. Good luck bud
  28. N

    G’day Tony, was wondering if you have any rear valiant wheel lip trim in your yard? 67-72 if I...

    G’day Tony, was wondering if you have any rear valiant wheel lip trim in your yard? 67-72 if I recall. Thx,
Back
Top