Search results for query: *

Hi. Im trying to help out my cousin with his 64 barracuda 273 push-button 904 auto . This car is a dog as it starts out in 3rd gear and won't kickdown. If I try to start out in manual low, it won't move- it acts like it's stuck in 2gears at the same time. Kickdown linkage looks fine. I'm not...

I am putting a factory console in my 76 duster and just purchased ACC carpet for it. I have read posts here about attaching the carpet with Velcro. Do I use the Velcro to attach the carpet to the console and floor carpet ? Or just attract it to the console ? Where can I get good Velcro? Any...

Due to wheel and spacer issues, i have to run 3" studs on the front discs of my 76 duster. Confused on the knurl diameter. Classic industries catalog shows .620, but the studs I removed measure .614 to .616. Looking at Moser 8010 or Moroso 46180 at Summit Racing. What fits best ?

I converted my 76 duster from bench to bucket seats and now I am working on the factory floor console. Should it be centered between the bucket seats side-to-side ? Pictures or measurements would be awesome ! Thanks for any help !

Hey all, I have a 76 Duster that I have owned for 35 years. Recently restored and enjoy cruising and car shows. Looking to upgrade the suspension, mainly shocks for now. Has had PST front suspension kit installed at least once since I've owned it. Looking to spend around $250 for all 4 shocks...

I am replacing my 1977 318 904 with a 1969 318 904 . My 77 318 904 had a torque converter from a slant 6 that stalled at 2600 rpm with my 318. It has a cracked hub, so I can't use it. The 1969 318 904 has an unknown factory style torque converter. I haven't found numbers on any of these...

I just pulled my leaking 1977 904 trans from my 76 Duster. My plan was to fix the leak and overhaul it. It has a decent shift kit in it and a 5000 rpm governor. Was parked from 1994 to 2018 ! It was leaking from the bell housing area so I assumed it was a pump or converter seal. Well, when I...

I'm looking at the torq-thrust style wheels for my 76 Duster. Considering Rev Classic 100 anthracite or American racing wheels torq-thrust M anthracite. Anyone with opinions on what is better ? Is the quality comparable?

Hi. I have a 76 duster with a 8 3/4 rear end from a 65-67 b-body(54.25" flange to flange width) . I am looking for wheel and tire combos that fit. I currently have 245/60/14 tires on 14x7 rims. I would like to upgrade to 15 inch wheels. Tell me what fits ! Thanks for any help !

Hey all. I recently restored my rallye red 76 Duster with parchment colored interior. I need to add a stripe to the car and I am debating between white or black. I kinda want black since I have black wheels, but I am concerned about the light colored parchment interior color. Any pictures or...

Are 73-76 A-body bucket seat bottoms the same left and right ? I know the tracks are different, but what about the seat bottom frame and cushions ? After having my seats re-done they don't seem to sit flat in the car. Thanks for any help Alan

Ready to buy carpet for my 1976 Duster and I'm not sure about the color. The original carpet was a dark tan or light brown. I have the broadcast sheet, but was not able to find the carpet color code on it. The seat color is parchment. Classic Industries catalog shows gold as the closest color...

Working on my 76 duster seatbelts and I can't remember where the different bolts and spacers go. Any ideas ?

Restoring a 1976 duster. Installing interior and trim. Where does this part go ?

Trying to get a pair of bucket seats for my 76 Duster. It currently has high-back buckets from a 77? Cordoba. They are maroon vinyl, with lazy-boy style buttons on them I need seats with vertical pleats and parchment vinyl . Are all bucket seat frames the same ? Can I buy 73-76 Duster Bucket...

I have a 76 duster and I am looking for high-back bucket seats for it. I prefer seats with tracks that fit cars equipped with catalytic converters (late 74 to 76 I've heard) , but I am open to all options. Post or p.m. me with options please.

I just had the windshield and back glass installed on my 1976 duster. I also had the glass guy install the stainless steel trim around the glass. Problem is the trim doesn't fit well. I had the original trim straightened and polished by a trim guy but he didn't have access to the car. So I...

I got my duster back from the body shop last October. They removed the crappy rocker panels (not stamped) that I installed about 15 years ago and installed new AMD rockers. They also finished the body work and painted it Rallye Red. I was building new 3/8 fuel lines tonight and I noticed that a...

I replaced the trunk seal in my 76 duster with a D-shaped seal from metro. Part # is TK 56-B/18. Now of course, the trunk will not close. I have seen posts about using a different shaped seal to correct this problem. Is this the only solution ? I have my original seal and it is D-shaped. Has...

Hi. I replaced my 76 dusters door strikers and now I can't get the doors to open properly. They are adjusted properly for height and flushness. Took the strikers out and tried them in the latch manually- it appears that the head of the striker has too large diameter. They came from classic...

I need to replace the door, roof rail, and quater glass weatherstrips on my 76 duster. I also need the window sweeps. What brand or supplier fits well ? Thanks in advance !

Looking for window sweeps/cat whiskers for my 1976 duster. Confused ! A lot of websites show 8 pieces, but I only have 4 on my car. Other websites show 4 pieces but for the outside only ? Has anyone figured this out ? Mopar Cat Whiskers Side Window Sweeps 1970-1976 Plymouth Duster...

Hey all. Looking for a factory tinted drivers side door glass that will fit my 1976 Plymouth Duster. Appears to have 7 holes in it. Interested in shipping to 68803. Let me know what you have. Thanks !

I need to paint or dye the a-pillars, sunvisors, and sail panels on my 76 Duster. From what I can tell, my interior color is parchment. I can't find any paint or dye for this color. I have looked at Herbs parts and Classic Industries but i can't find anything for parchment. Am I missing...

Looking for firewall insulation for my 76 duster with a/c. Mine is mostly gone but the pictures on classic industries website don't look like mine. Mine had a pad around the wiper motor hole that I don't see in the pictures. Any other pictures out there ? Looks like 67-76 A bodies with a/c...

Working on my 1976 Duster resto project.... Need to know what color the plastic filler material between the bumpers and the body should be. Mine is grey and all the pictures i have found are grey too. But body-color would make more sense. SO is it grey or body-color ? Thanks !

Hi all. Looking at my 76 duster rear seat belt retractors. I had to fabricate my inner wheelhouses and i thought there was a reinforcement bracket for the rear seat belt retractor attaching bolt. Can't find any pictures here......Been a long time since I started the project....lol !

So, how do you restore the plastic bumper filler material ? I have a 1976 Duster and I cannot find reproduction bumper- fillers, so I assume that most guys restore there own. So how do you do it ?

I have a 1976 Duster with an offset antenna hole in the right front fender---Round hole with a single locating notch and an offset in the sheet metal. My new fenders have a larger round hole with 2 notches and no offset in the sheet metal. Looks like the antenna bezel has the offset. Are...

Just got some good used fenders for my 76 duster from a fellow FABO member. they look pretty good but have a little bit of surface rust on the inside. So what is a good way to clean them up ? Looking at the Eastwood rust encapsulator stuff and it sounds good. Anyone used this ? Also notice...