Search results for query: *

Have a 742 case pumpkin, new 4.56 gears, 35 spline Moser spool, a pair of 742 yokes, 1 is a 10 spline, the other is a 29 spline, both use the 7260 u-joint, a new 489 yoke, 29 spline, uses the 7290 u-joint, a set of rear bumper brackets for a '70-'71 Barracuda/Cuda, (may fit '72-'74?). $700 for...

Doing a little cleaning, have a clutch fork (I think early A-body), along with pivot ball brackets and linkage, $50 shipped to the lower 48 for all of it.

Hey guys, looking for a headlight switch plug/connector for a '66 Barracuda, (I would imagine the other early A-bodies are the same), the one that Amazon and Standard show does not fit, if anybody has a parts car or extra harness lying around, would like to buy the plug with maybe 6" of the...

Hey guys, looking for a 727 10" convertor, around 3000 stall, would prefer the 7/16" bolts instead of the 5/16" bolts. I am in Lancaster, Ca.

Prices are shipped, 383 Street Master intake-$150, bead blasted, ready to go early A-body stuff-- visor mounts-$25 pair, headlight rings-$25 pair, fender mount turn signals-$30 pair, rear view mirror-$20, dash speaker bracket-$10, door mirror-$20 '67-'69 Valiant vinyl top trim-$25, old Dodge...

Hey guys, doing a little garage cleaning, selling some parts I won't be using, all prices are shipped to lower 48 Comp Cams 944-16 springs with titanium retainers $250 Manley Nex Tek #221440-16 springs $150 Painless Wiring 7-circuit Circuit Boss, new in box #70107 $60 Energy Suspension strut rod...

I am cleaning out the garage a little of a few things I no longer need, The driveshaft from my '66 Barracuda, which was a V8-4-speed-8.75 rear end car, it measures 49.75" center to center on the u-joints, has the small u-joint I believe, ready to install, does not have many miles since new...

Hey guys, I have the cloumn out of my Valiant, the shaft has been collapsed and have pulled it back apart, but need to know the length of a A-body manual shaft and where the measurement is taken, ( end to end or bottom of threads to end etc). I have seen 40 3/8" listed, but also 42", I plan to...

Hey guys, looking for the 20 or so clips that hold the chrome trim around the rear window of a '69 Valiant, the set they sell for a Dart are not the same, those are longer by 1/8" or so. Also need the grille hardware, it is not offered from anyone, I have nothing to gauge from since my grille...

Does anyone know who carries or produces a grille screw kit for a '69 Valiant?, I've checked Layson's, Tony's, Year One and Classic Industries, no luck, car gets painted this week. When I got the car, the grille was sitting in the front seat with no hardware.

Selling a 8.75 pumpkin, 742 case, with new 4.10 gears, Strange 35 spline spool and new bearings, never installed it, had it built as I was thinking of dropping the gears from the 4.56 in it now, decide to do a truck Dana cut down. I'm asking $700 plus the ride, from 93535. Also have a bare...

Selling a few things I don't need, Edelbrock II small block intake, $150 shipped to lower 48. set of 340 bushed rods, $70 plus shipping factory 360 car pan and pickup, hot tanked, good shape, $60 plus shipping factory 360 windage tray, $75 plus shipping standard 360 crank, $50 plus shipping...

Hey guys, selling a new in the box MP 4" cast crank for a 318/340 block, PN P5007256, has been sitting in its box on the shelf for few years in a friends garage, $275 plus the ride, Summit sells for $412. Also selling a Edelbrock Torker 2 for a SBM for $150 shipped in the lower 48, bead...

Hey guys, changing direction, selling a Comp Cams cam new in box, part #20-223-3, Xtreme Energy .477/.480 lift Summit sells for $130, selling $100 firm Sealed Power hydraulic lifters, new in boxes, still wrapped in sets of 4 boxes, #HT-2011, Summit sells for $3.99 each ($63), selling for $40...

Selling a pair of old school Firestone G60-15 Super Sport tires, great shape, very deep tread, not cracked, asking $125 plus the ride.

Hey guys, selling a set of new Gibson headers, part #GP300, I never installed them, and I'm planning to buy a Cummins after the holidays, so these aren't needed. They fit 94-01 5.2/5.9 Rams and Dakotas, nickel plated chrome shortys, bolt to stock system, 50 state legal, comes with all hardware...

Selling a pair of old school Firestone Super Sport tires, great shape, deep thread, asking $150 a pair plus the ride from 93536, can send pics to a email or cell. thanks FABO!

Selling some parts off a 440 I bought, I only needed the block, so selling these parts. 440 Torker intake $125 shipped to lower 48,great shape SOLD THX FABO B/E body headers, good shape, no rust or dents, $75 plus shipping The rotating assembly, 10/10 steel crank, L2295F standard bore...

Hey guys, selling a early A-body flywheel, originally from a 273, had it balanced for a externally balanced 360 when I had the 4-speed in my Barracuda. I installed a T-5 transmission from a Fox body Mudstain, so I don't need this anymore, in great shape, no broken teeth or stripped bolt holes...

Hey guys, selling a bare 1968 340 block, dated 6-18-68, is standard bore, will need one sleeve, has main caps in place, asking $400 plus the ride. Selling a 1970 340 long block, has around 2000 miles since rebuild, is .040 bore, with one sleeve. Has a Comp Cams Thumpr cam kit, U casting...

I have a 1968 340 block,standard bore and will need one sleeve, with its main caps,dated 6-18-68, VIN #LM23P9F107928 it looks like, on the other side is stamped 2780930-340-7 Its in Lancaster, Ca. and asking $400 plus the ride. PM me your email and I will send pics. Thanks,

I've just joined the other day, been a Moparts member for quite a while. I have owned my '70 'Cuda since 1987, originally a 340 H-code LA plant car, Lime Light Green with black hockeys. I put a 440 in it in 2000, then swapped the short block for a 499,using the same Indy SR heads,Indy intake,950...

Selling a 1970 340long block,040 over, has about 2000 miles on it, Comp Cams thumpr cam kit, double roller chain, "O" cylinder heads, dated 1-5-70, VIN # 0R257478. It does not have a intake, does have timing cover, pan and balancer, I'm asking $2000 plus the ride. Selling a standard bore bare...