Search results for query: *

Yeah!! Thanks!! The Service Manual at that site has the printout and is exactly what I needed! Thanks man!!!

Thanks! I'll check that out.

I'm wondering if anyone has a picture of their 68 barracuda fender tag they could share. I'm having a new one made, because mine is missing and need to see what it looks like. The only ones I can find on the internet are not specifically off a 1968. I want to make sure I get it correct. In...

Hi Pabuhr, Wondering if these rims are still available, and if you'd sell just one. Thanks!

Hey guys. I just wanted to say thanks again to all of you. I found a place to get the choke thermostat for my 68 manifold like you suggested 66fs, and just got it installed and man, it is f'n perfect. The carb is woking mint now. 65Val, thanks again for the great picture. It helped as well...

Okay great. I do see the one hole for the bolt in the manifold with the carb on. Does that choke thermostat for the 68 only have one bolt? Thanks for the info 66fs!

Hey guys. Thanks for the quick replies. The casting number on my intake manifold is 2806301. Then it has a 82-9 next to that. And a 1 A next to the chrysler star emblem. Thanks for that picture 65Val. I can't tell from it how it attaches to the manifold. Thanks Oldmopardude for the info...

Hi guys, I have a Carter AVS 4966S and I'm wondering how the choke works. The carb came with my 1968 Barracuda 383 that I recently purchased. I rebuilt the carb and it is working great, but I can't get the choke to operate correctly. I'm wondering if it's missing the choke thermostat. I...

http://www.mymopar.com/index.php?pid=24 Go here for wiring diagrams. A great guy to talk to about it is Ben. This is his website and you can email him. I just had him rebuild my gauges and he's amazing. His website is...http://www.demonivr.com/index.html Good luck.

I had similar problems with my 68 cuda. Turned out the fuel, temp, and oil gauges were all burnt out. The Voltage reg was inside the fuel gauge also. I ended up sending it to Ben who I found via guys on this site. He did an amazing job. He took it completely apart re-soldered and cleaned...

I highly recommend checking out this site and contacting Benny via email. I just had him convert mine. He's a great guy and really knowledgeable especially with the ammeter to Volt conversion and gauge faces. And he does great work if you decide to have him do it...

Thanks a lot man! Like I said...You're THE MAN!!

Ok mderoy340, I should ask you where to splice into this IGN1 "Blue" wire. There are two Blue wire inputs to IGN1, one from the Brake Light Feed on the dash cluster, and one going straight to the Alternator Regulator (bypassing the resistor). I'm guessing the one that runs to the Alternator...

mderoy340, YOU'RE THE MAN!!! I thought about doing that, but was afraid to. BTW, the people at MSD are no F'n help. Thanks for the help! I truly appreciate it! This site is the absolute best thing in the world.

Hi guys, I need some help. I have the wiring diagram for my 1968 Barracuda 383 S Notchback. I have an MSD ignition and coil. Ok, so here's my problem...On the ignition switch the "IGN2" tab where the Brown wire connects should get power when switched to the "on" position and stay on when...

Thanks for the help guys! Man, this is the best site.

Hi Guys, I just bought a '68 383 S Notchback and I'm in need of a Dash Ash Tray. Also, I'm in need of the center console ash tray, and the antenna. Thanks! James