Search results for query: *

I was thinking that I like the front ends of the '72 dusters, will the hood and grill insert fit into a '74 swinger?

I couldn't find any threads in the search about this. I was considering finding a later overdrive geared 904 for my slant equipped '74 dart swinger, since they can be found in the various slant trucks around. Are there any real benefits to this? Has anyone else done this, and if so, any real...

The car is a 1974 dart swinger, 225 /6. 1: The light switch gets hot during use, at the end of my 45 minute commute, it is hot to the touch, not quite to a painful hot, but close. Is this normal? If not, how can I fix it? 2: I have done LEDs in all of my marker lights. If I switch to...

I'm building a 318 (1973 built) for my car, right now it's a slant car with a 7-1/4 rear with 2:93 gears. The 318 will be a ~9-1 compression with an SP2P 4 barrel intake, using a small thermoquad (750cfm, if I remember right) I might be using headers, but im not sure if they fit yet. I'm also...

I was wondering if anyone knew anything about these, i just saw them in the jegs catalog and was curious about them. What would the HP gain be over stock manifolds, and compared to a regular header setup...

I'm not %100 sure if this is the problem or if I have a grounding issue; My '74 swinger's fuel gauge has been acting odd, it's acting like the tank won't fill all the way, but I know it is. the gauge used to go a little past the full line when full, now it won't reach the full line. When...

Anyone good with photoshop? I wanted to get a better idea of what my car will look like after I do a paintjob, im set on copper paint, but im wondering if I should go with a painted black roof to balance it out. Im planning on using road wheels and trim rings, while keeping the stock chrome...

So a little while back, my brother says that I can have his old duster, a 440 conversion '70 he bought. And before anyone asks, I have no clue if it runs, i'm not going to make it my project, and no, i'm not selling it. Well, I decided to take him up on this, and I was thinking a 440 car would...

I need the two piece fuel line for a '72 318, The motor I have has a rubber one in place, I can buy them repro, but I want to see if I can get one cheaper here. They are 30 bucks repop, so $15 shipped fair? I do need both lines.

And a good, multi parent company mechanic could still probably overflow it. Saw this gem on Ebay If I had a spare $30G lying around i'd snap it up. If anyone wants to go for it, heres the link...

This has probably been done to death, but I wanted to know what some of you guys have used for a header gasket. I am putting headers (not sure what brand) onto a mild 318. So far I am thinking of using percys dead soft on the collector and exhaust ports, but does anyone have any other...

I was given a large sized dickies workshirt with rat fink printed on the back, its not really my thing, and its too big, so it never got much wear. I want to sell it for $40 shipped anywhere in the US. It is shipping from boise, idaho, 83716.

I have some leftover parts from the fixing of my '74 darts body, and I want to sell them. The windshield is an original chrysler one from a '74 four door valiant, I was going to use it, but I didn't know that 2 door and 4 door were different, it's in perfect shape; $75 I needed a new...

For a while now, i have had proplems with excessive noise and squeals coming from my radio, and i'm finally getting close to a solution. Everytime the car was running, the radio would put out a loud hum, and occasionally a loud, sharp, squeal. It made it impossible to use the radio.(sensitive...

Does anyone know where I can get a reproduction set of the '70 style wheel cover decals? The four I have are faded and one is falling off. The black center decals for this style. I am going to strip them down, buff out the scratches, and repaint if I can get them.

my dad and I have been working on a 1966 charger, and I noticed that there is some interchange between some of the parts, which got us on the topic of cruise control; in the earlier B bodies, it was rare, but in the A bodies it was nonexistent. My dad commented he had never seen one, so I was...

I saw this ad on craigslist http://boise.craigslist.org/pts/4903488005.html It says that it came out of a john deere swather, and I was wondering if the industrial slants were different in any way; higher compression, stronger parts, etc.

I went to a junkyard in mountain home, and came home with a box of antique plugs that has been in a shed for easily fifty years. Can anybody tell me an approximate date? I figured out that they probably were put into the old motorcycle V-twins of the 20's 30's 40's, but that is...

I have a squeal coming from my radio, and I am reasonably sure that it is due to a bad ignition coil suppressor. The problem is that Ebay seems to come up short, and google only gives me a forty dollar NOS unit, does anybody know of a new unit? I figure there has to be someone reproducing these...

So I am starting to collect parts for a custom project, and I wanted to know what a good turbo is for a 225 slant six. A friend of mine told me to use a turbo sized for a motor about 2/3 of what I had, with that in mind I would need a turbo sized for about a 150CI/2.4 liter sized motor. I was...

Not entirely sure if this goes here, but I wanted to know If anyone knew some mini starters that they liked for a slant six and a 318. I get sick of lifting the big factory one out of the car while working, and I figure its only going to be worse with headers.

I figured I should post my progress on my dart, so others can learn from what I end up doing. I bought this swinger, for use as a daily driver, in the fall of '13, It had been sitting for about three years, after being moved from the guys parents place in marsing. Unfortunately, a lot of the...

Today I was driving to the parts store for an alternator belt, and getting off the freeway, i hear a very loud bang, almost like a tire burst; and my car is shaking like its going to fall apart. I pull over and look, and the tires are fine, so I continue my trip into town and back home, on...

So recently I've had this problem of ice forming on the inside of the windshield of my '74 swinger, both front and back. my front is usually just spots, but it has also been completely covered a few times. The back windshield is almost always covered. The side windows are mostly fine though...

I am looking for a tan colored horn pad for a '74 swinger, I think parchment was the color name. I need one with the dodge logo in the center, the one I currently have has the plymouth logo. I am willing to pay $20 plus shipping to 83716, boise.

I figured I should ask this to satisfy my curiosity, my '74 dart is a 225, backed by a 904 auto, and when its cold, I have to let it warm for a good five minutes. Mornings in Idaho this time of year are around, if not below, freezing. If I don't, and shift into reverse or drive, the motor dies...

I have a 1976 super six motor, its probably got at least 100,000 miles on it, and since I decided to put a 318 into my dart, I wanted to set aside some money for a rebuild, and get a parts list ready. The motor is all stock, except for the timing chain I replaced, stock springs, valves, pistons...

I felt I should have as many ideas as I could get on this. I'm working on a custom car project that is, right now, all conceptual. I wanted to get other peoples ideas and suggestions for the car. It's called the El viajero, and its what I think should have been the dodge answer to the...

Or worst depending on what kind of person you are. I was bored and thinking about the different types of darts, and I had an idea! I like the rear end of the '74-on darts; but I also like the front end of the '72's, I think they look cleaner. So the Idea is, could you take the front...

Has anybody used those mopar oil filters that i've seen at parts shops? White/blue box with the blue M. If so, what works on a slant, and what works on a 318? And who makes them anyway? Are they some gimmick by fram, or is it an actual chrysler product?