Search results for query: *

What you get for it?

Obviously a slant six and remflex only makes one gasket for it. Using stock intake and exhaust. Thinking I just need to over torque the nuts to squish the gasket and then re-torque to spec or buy longer studs. Anyone have pros or cons on either?

No help here huh? Everyone recommends these gaskets buy never had this problem?

Remflex Gaskets so thick that im not catching many threads. I can barely get top center nut on with the conical round washer. longer studs? anyone have a source? with a thicker gasket will increasing torque multiply?

When everything is clean and the problem isn't resolved replace the needle and seat?

Needle and seat look clean took the float bowl off and the gunk in there is pretty bad. I'm not sure that replacing the needle and seat would do much as it seems like a pretty basic system, how could one tell if it's faulty visually?

Haha! I knew it was serious. I'm gonna see what I can do without a hammer first

The needle and seat is the only thing I took apart so I could powder cost the fuel hardline. I'm positive that's the problem. Can it be purchased separate from a rebuild kit? Guess I'll try cleaning it firs

It's a holly carb model 1920. I only use hammers to drive nails. Thanks for the tip. I'm not carb savy. Can I just clean it out with carb cleaner or do I need to disassemble it?

I changed my manifold gasket and replaced my cracked exhaust and now my carb is doing crazy stuff. Is there a member on here who is a carb guy that could help? My carb is spraying gas straight out the top. I'm wondering about the throttle and choke linkage. Nothing has changed so not sure...

Fastenal part numbers Brass washer # Z9096BR lock nut 5/16 #37462 Brass 5/16-24 nut #75131

Anyone got one or know where i can get one of these? 66 wagon driver side tail gate light

Where do I get one? Is there any advantage to it for left side drive? Seems it might be easier to do oil change

Super Curious about that oil filter relocation

I was able to track down the hardware at Fasenal using the McMaster part number. Only difference is brass washer thickness. .125 instead of McMasters .167 minimum. Easier for me to get local than online but some of the most expensive nuts and washers I've ever bought. Really appreciate all the...

So I feel I'm still lost on what I need to attach both top corners of the exhaust manifold. McMaster has a lot of hardware and I'm not finding the right thread size for the nut I thought I should be using based on a bad picture on Slantsixdan.org. And as far as the washers in these position. I...

This end hardware seems to be particular. Does it really matter? If i follow the 10lbs torque specs will not be be OK with a washer and/or lock washer? brass, stainless or zinc coated nut gonna make any difference?

I scored an original Manifold off ebay. Just need to finalize the hardware situation. Having trouble locating the end hardware. Both ends on mine were broke off. Anyone have a single triangular washer laying around?

I pulled 9 off and one round one from top center. Do i have them all? Where do i get this brass beveled washer?

Are there supposed to be 10 of the triangular washers that hold the intake exhaust manifold on?

Had an Exhaust leak so i decided to change my gasket. Unfortunately the exhaust manifold is cracked but i got all the studs out with out breaking any myself. I was curious what sealer i should use on the studs? Also the front and rear top holes to mount exhaust manifold were broken off do...

So the 60" from a mustang would have to be cut 1 3/4 from each side to fit?

Love this thread slot of good info. Found an 8.8 from a 2000 mustang GT. from the pictures both sides seem to be the same length and owner said it measures 60" across. I'm a missing something as to why people are cutting the exploder rear vs just getting the mustang? Also if I do this mod will I...

I saw you doing burnouts last summer at Columbia River Mopar show. Sweet wagon you got for sure.

Found a tail gate local from a valiant, And I have many questions about the subtle difference between a Dart and Valiant. The new tailgate has a manual pump but id like to keep the power window since it still works. Are the cutouts for mounting the same? I also have the same question about the...

Looking for a Tail Gate for my 66 Dart.