Search results for query: *

Pretty sure it will. I'll send you a PM.

Will this fit the wheel in the attached pic?

Has anyone out there 3d printed a speedometer bezel for a '70 Dart Swinger? Specifically, I'm looking for the sweep style, and I'd prefer to not chop up either the one I have or one I may be able to buy, just hurts to potentially ruin something that's hard to find. I ordered a set of...

That actually became a problem lol. I wound up using stacks of wood cribbing. The oem jack helped a lot! Amazing how high you can get these with a simple bumper jack.

On the plus side, what I did save has cleaned up quite nicely. The rear bumper is WAY better than the one I had, and most of the trim is super clean after polishing it up a bit.

Here's a bunch. It broke my heart to chop it up, but the wife was less than thrilled about having it out back. I let was was left after I pulled the drivetrain go cheap and have been kicking myself ever since, particularly because I sent off a lot of parts I really needed.

Just cruising through some old posts and came across your ad for the speedometer bezel. Any chance you still have it?

Been a while since I posted an update... So about 18 months ago I fell into another car, a real Swinger 340. Unfortunately, it had been sitting in a closed garage with a dirt floor for 30 years. That being said, pretty much all the sheet metal was shot. In any case, the entire drive-line has...

Thanks!!

I just picked up a spare slant six and complete 3 speed manual transmission. Trying to figure out what exactly I have. It reportedly came out of a 67 Cuda (225 with a 3 on the tree) and was essentially unmolested before the pull. Guy said it ran and drove but when it went on the lift the chassis...

Unfortunately it doesn't look like anything I need. I'd be in the same boat, hate to see them go to waste. Thanks

Do you have any pics?

Thanks so much. Based on this it looks like my donor car is going to have exactly what I'm looking for. That and the factory bucket seats makes it worth dragging the thing across the neighborhood.

Thanks! I can't tell for sure, but in your second pic it looks like the axle housings taper at the pumpkin the same way the LeBaron rear I can get does... One of my buddies that's lending the occasional hand with my project says that he can mod width of anything I get no problem, which also...

I am brand new to this resto business and need a bit of advice. I've done a lot of work on vehicles over the years, but I'm painfully inept at anything related to rear end work. I have a '70 Dart Swinger that's currently in a whole lotta pieces. Started as a quick flip, but you all know how that...

Found one!!! Thanks!

Thanks so much! The 904 3 speed is what I was thinking.

I'm having a similar problem. Willing to throw some assistance my way? Here's a link to a thread with a pic of my build sheet: '70 Swinger Project

So I have this... Thought I'd be able to figure out how to interpret it, but all the online tools I'm finding doesn't show the codes the same way - for instance, I know from the VIN that it originally had a 225 with a 1 bbl carb. So in theory, the carb code on the build sheet should be either...

The entire housing cover.

Looking for a heater box/core cover for a '70 Dart Swinger, no A/C. One of the only things holding up my resto. Anybody got one? There was one listed for free here last summer but the thing was bound for the trash if no one responded in a week or so and being new to the forums I missed it.

I just bought one for a 70 Dart from Rock Auto for around $45. Brand new, just as solid as the original.

Don't think I'll be able to afford to make it that far, but like I said, I've heard rumors it can be done. Thinking of fabricating some sort of housing and trying a supercharger from a newer vehicle. I think some of the newer Oldsmobiles had them, may be able to get one from the local u pull...

No problem. Thanks for checking!

I found a bench on eBay that would be about $100 to ship, so if the price is right I might be interested. Let me know what he wants please.

And yes, that is a well-preserved mouse in the oil pan.

New Upper Lower Ball Joints Tie Rod End Suspension Kit For 1970-1976 Dodge Dart | eBay So, this kit should work?

Nah, not looking for a change of suspension, but all of the bushings are shot (or close to it). Figure while I have it apart it might be easy to replace some of the hardware for (presumably) better components.

I'm not entirely sure, didn't mic the cylinders while I had it apart, so don't know if it's been bored. Googling the numbers on the cam wasn't a lot of help, but it looks like it may be .440 lift. Definitely timing gears/chain upgrade, and heavy duty valve springs. My buddy with tons of...

I will say it's the meanest 6 I've ever personally heard.