Search results for query: *

Not anymore it stopped working as it was drivingreat my dad said it's like it got air in the system agian maybe there's a leak. I don't know I'm confused. It wasn't really going all the way to the floor but it was at least making the clutch do a little bit to make it a little easier to shift.

Well it always starts in neutral and yeah in gear it just starts going the guy drove it like 150 miles to bring it to me with out the clutch he just speed shifted.

That is exactly how he drove it I got the clutch to start working and my dad drove it to my fiance'so grandmas so I'll have it worked on there and hopefully can have it out of her yard by the end of july. But right before we got the the clutch stopped working agian my dad thinks there is air in...

Thanks lol, the reason all of this is so important is because it is my home. I am being evicted from where I have been living tomorrow is the day I had told them I would be out but I don't think it's possible yet. So I'm probably going to be served an eviction notice and hopefully be out before...

Yes and I don't know how long he has driven it with the clutch the way it is for all I know it drove out to burning man like this all 6 times. He definitely knew how to drive it well in the condition it is in. Can I pressure washer it myself? Driving it somewhere like that would be at least a...

Well I've called around and no one in my town seems to think they can help me with the clutch but once I get it pulled and take pictures and measurements of it and send it to hr clutch I am confident they can supply me with what I need

I am not going to attempt this myself I am going to pay a my bosses mechanic to do it I am assuming he will have help with him as well and I will help him if need be and I belive he has all of the tools to do it. I'm hoping he will do it where it's parked otherwise I will have to drive to him...

I believe there is a cover over that area

It probably is junk considering there is leaks that have been leaking for obviously quiet some time and the previous owner had gone out to burning man 6 times with it so there is desert mud all mixed into all the grease and all over everything that isn't greasy too. Like thick caked on dried...

So if that is the case I should go ahead and get it all taken out measure the clutch plate and take pictures and order the clutcb because if the transmission has to come out why wouldn't I just replace the clutch while I'm at it. And get everything clean maybe replace some seals while its apart...

So could I just clean everything? But if I have to take the transmission apart anyway I should just go ahead and replace the clutch too right? I mean at least then there would be a new clutch in it that I wouldn't have to worry about for hopefully quite some time, given it is driven properly.

I will absolutely let you all know how everything is going!

When I got down there I was trying to move the fork back when I had the rod disconnected but it wouldn't budge. But I am only a 5'2" and 100 lb woman I'm strong but not like crazy strong especially in the position I have to be in to reach it from underneath or above

Okay well I do think it's the rod that needs either adjustment or to be longer I'll have the mechanic look at that tomorrow and hopefully he can figure it out if it is just that I can order it from hr as well. I have been back and forth about the clutch part several times now I keep getting...

I was thinking it needed to be longer as well. I just call hr clutch and they were able to find a clutch for me and I think I can order a whole new system through them including the fork and rod set up they do want me to get the clutch off and send pictures with measurements to be sure but they...

So I should be trying to locate a clutch. My problem is, I don't know what size clutch I need. The transmission is so covered in grease it'll take me hours to clean before I could ever find a serial number. And I wouldn't even begin to know how to clean it properly. So I'm pretty much left with...

So by saying the clutch is done do you mean I need a new clutch? And I am unsure if the slave was original or not the one I took off looked like it had been there for quite some time but the piston I believe is what it's called was stuck in place all the way back and not moving at all. I was...

So from what I know the slave that was on it before I matched and bought this new one it may be the wrong one but it sure does look right bolted up there and that may not mean anything. when we put the slave and master on and we were bleeding it yes the pedal would go all of the way to the...

Well mine has anew exhaust leak so I'm not getting proper power from it but it sure doesn't like to go fast especially up hills but this is also a 26 ft long bus with cabinets and furniture in it so I'm sure in a smaller vehicle it would have a lot of power especially if everything was in...

No but I will!

It only move's about 1/4 of an inch I posted videos. The pedal still has at least 6 inches before the floor it won't go any further.

thing that big, "heavy truck" I doubt it's a 23 spline transmission. If you cannot find a listing you are in the wrong parts store or talking to the wrong parts "person." If you are in "any kind" of city look for a "clutch and brake" rebuilder I did not see this part. But I can...

Okay here it is for anyone who can help. Some more info on the bus it starts no problem, the guy I bought it from power shifted from Reno nevada to placerville california roughly 150 miles to bring me the bus. The problem is I do not want to drive it that way. I need the clutch to be working...

I think I may have read a bit of that post but I really don't know enough about motors and I'm soley going off of what others have told me. Here's a pic of my motor I can take a better one tomorrow if this is not sufficient. I also have videos of the clutch pedal movement and the slave...

Alright I won't call it a wide block that's what someone on another forum had informed me that it was. Are you still saying that the clutch for the 318 LA will work? all the clutch says is that it's for a chrysler 318,340,360, and 383 And from my understanding the motor I have is not one of...

Oh my goodness I really hope so I'll go for it and order it I suppose

I need some advise, I recently bought a 1965 dodge s400 (it's a school bus) with a 318 poly engine. I need to replace the clutch. The only clutch I can find is for a 318 la engine. I need to know if the transmissions were the same or at least similar enough for the clutch to work. From my...