Search results for query: *

1967 Valiant has a slant 6 distributor is original points. I ran the car last 18 months ago. Went to start vehicle and would not start. I am not getting spark from the coil. Checked ballast resistor functioning, coil functioning (even put a new one on). I am not getting power to the...

Cleaning house and I have three sets of hubcaps and a couple of misc ones not sure years make offer (not including shipping)

I have the front and rear window trim from a 1969 Baracuda fastback they are in excellent shape 150 for front 150 for rear plus ride I will be at Spring Fling this weekend computer down can send pictures via phone or email

Trying to finish my 67 and need to find the following 1. Drivers side headlight bezel 2. Small trunk upper and lower trunk trim 3. Shift lever for a 67 *has a solid black handle at the end 4. A set or just the driver side black a pillar 5. Power steering pump pulley for a Saginaw pump and cap...

Went to put the steering column back together and have the wrong shift lever I need this one. If you have one in good condition let me know. If you have the rnd2l plate I will take that two. THANKS FOR LOOKING

Misc 67 Barracuda parts Dash Bezel solid condition all gauges heater control 3 speed wiper switch. 175 plus ride Fresh air box nice condition door works well 15 plus ride Steering wheel inserts 1 fair 20 plus ride the other real good 30 plus ride Bottom of doors red inserts only 1 broken tab...

HELP the power steering is hitting the k member. What am I doing wrong. I have a Magnum Motor 360 with the 1970 later water pump. Do I have wrong pump or wrong brackets. Thanks for any help

:blob:Just got back my valve covers from Leanna and I am very pleased with the quality of the work. It was well worth the wait and the cost. Excuse the engine compartment mess just wanted to see how good it will look with those valve covers.

1967 Barracuda Looking for the AC hard line for the low pressure line (the line from the firewall to dryer) and the line from dryer to condenser. Also need the valve on the fender for the heater hose. 85355

New Legendary rear seat cover both upper and lower Legendary Cologne grain Fastback.............AA67CB00070(C) 125 plus ride located AZ

Rough shape has radio cut out lens in good shape 30 plus ride Speed o and other gauges faces in great shape gas gauge card board backing no good seems to have gotten wet at some point 25 plus ride

Clay Smith Big Block cam, lifters, and 3 bolt double roller timing chain 306 duration 246@50 108 lobe center 510 lift All three for 175 plus shipping Big Block roller rockers 1.5 ratio 150 obo plus ride Located in AZ

Trying to restore the front grill. First- with front grill can they be polished or do you need to re anodize them. Is there anyone that is re anodizing without spending a fortune. Second- on the headlight portion is the part around the head light chrome or argent and how do you repair that...

Needing to replace the steering coupler on a 67 Barracuda power steering. I have seen that people are using the Borgeson coupler or the Flaming River. Have found the part number for the FR but not the Borgeson. Cost of FR is high compared to Borgeson. Does anyone know which Borgeson to use...

Does any one have an extra Flaming River PS coupler they would like to sale. Part number FR1506P Thanks for looking

I need to disassemble and clean the steering column for 1967 Barracuda. Need help on how to take apart. The manual shows specialty tools. Is there a way to do this without the tools. Thanks

I need the ac switch for a 1967 barracuda. Also need picture of the wiring underdash for the ac Thank you

Working on getting my 1967 Barracuda back together. It started life as a slant six silver with red interior. It found its way to a back yard in Southern CA were it sat and was picked apart. We cut the weeds out from under it brought it home and changed all the fluids new battery fired it up...

Adding a vinyl top and need help with the location of the holes. any pis would be helpful even from the inside of the trunk (nut side) would help.

Looking for a good quality pair of aluminum burlwood door panel inserts 1967 Barracuda example below

I need this version of wing window frames with decent chrome. Came off the 1967 the later versions have a hook and this one has the bolt on style. My zip is 85355 Thanks for checking

Looking for the metal molding clips windshield for 1967 Barracuda notchback. I believe there are 4 on each window. Also need the Barracuda script, fish, and circle with fish.

Need 340/360 mounts

Need a pair of brake backing plates 11x3 Thanks Edie

I pair of early A body seats black with some tears in covers. The chrome and tracks in great shape. $250 plus shipping

Help almost had a carbacue tonight and toasted the engine compartment wiring harness. I need the engine compartment wiring harness with ac for a 1974 dodge dart. Thank you Edie

Need a windage tray for 360 with bolts mother Mopar on back order.

I need the fender braces for a 67 barracuda and the splash sheilds. Mine missing

I'm missing the brackets that mount to the fenders of my 67 Barracuda. How many are there and where are they located. I see 3 different tabs one in the center front and rear of fender. Thank you for the help

I'm about to attempt the 518 conversion on my Barracuda. There are a lot of great links here to work from. What I need help with is if anyone has or knows of someone who makes or can the cross member. This would save a ton of time in the fabrication process.