Search results for query: *

This will probably open up a can of worms as this subject has been well covered but I am interested in some recommendations that folks have actually built and ran. Here are the particulars. Care is a 73 Dart swinger 3.23 geared 25" tires factory high stall converter in 904 with a TF-2 shift...

I changed my rear end fro 2.76 to 3.23 and couldn't get my automatic shift points back where thy used to be, they were shifting way to soon. I tried adjusting the kick down but it didn't seem like it was making much difference. Since the trans shop installed a shift kit when the trans was...

Very nice 800 CFM thermoquad 9292S, list shows it came of a 1980 360 truck. I would think the calibration would be about right for a warmed over 318. Has been stored upstairs in a box for some time now, looks like it has never been messed with or apart. It is as it came off not even sprayed...

Pulleys have been blasted and painted small one is real nice 5 3/4" diameter 2 5/8" deep, large one is 6 7/8" diameter 2 7/8" deep. Left over from my AC conversion to Sanden compressor. $20 your choice.

I am re-installing the AC in my Dart, I am going with the original evaporator, sanden compressor, expansion valve, and new hoses. Unfortunately my original condenser is damaged and I was thinking of going with a newer style parallel flow unit. I am wondering what size would be appropriate to...

My car came back from paint last year and I am going through the last of the things on the list to fix. I havent been able to unlock the passenger door from the outside. I thought the linkage had probably came out of the clip but I find the linkage is missing. Probably got lost in all the...

Complete set of stock magnum springs, keepers and retainers. Cleaned and ready to go. $10

Clean AM radio with bezel in good condition. Radio was working when replaced with an AM FM factory radio. Has been stored in a warm and dry place. $50

I had my 904 rebuilt and asked for a TF-2 to be installed, it never really shifted much better then stock so I took it back and found out they had only installed the TF-1 which explained the type of shifts I was getting. I had them install the TF-2 and my shifts were much improved 2nd to 3rd...

I am looking for a headrest to fit a 73 Dart with bench seating. I have one that is cracked, I would consider a pair if necessary, color does not matter as I will be dying black to match rest f interior.

For sale nice 2 piece molded replacement carpet in decent shape. I have changed my interior color and going with a black carpet. $50 plus shipping. Pictures are exactly what you will receive.

Has anybody used one of the E-bay single turbo headers for a GT45 turbo in an A body? It looks like it might work but the other exhaust inlet seems in an odd...

I am currently running 205/70r14's on a 6" wheel with 3.5" backspacing on my 73 Dart. I am going to 205/60 R15's and either 15x6 rims with 4" backspacing or 15x7 with 4.5" backspacing. Rear is an 8 3/4. Currently everything fits fine although the fronts are close they don't rub but could use...

I am looking for a rear bumper for a 73 Swinger in good condition. If you have one let me know and we can discuss shipping arrangments or pick up. Thanks Phil

Am looking for a picture of the correct transmission kick down lever for the 904 running a 4bbl. I believe they are shorter and indexed differently. I changed my gearing and carb recently and cant get the geometry I need to get proper part throttle shifts without top rod too long and limiting...

I am looking for a B&M 144 blower and manifold for small block mopar. complete set up would be preferred. PM me here or text 319-551-8880.

I recently replaced the rear end in my dart with a 8 3/4 with all new brakes on rear. I found I had a bad master cylinder so I replaced that and the booster. I did not buy the pre assembled set up as I changed the master first then determined the booster was bad. I installed the reman...

Free to a new home or I would deliver for fuel. Out of a 73 Dart Swinger 2.76 geared big bolt pattern 10" brakes drums are in good shape. Nothing to write home about but would be good to get your car moving again or useful as a roller while your building something better. Not to much slop...

Complete good running 5.2 magnum out of a Grand Cherokee. Could hear it run if close enough. Is a good running engine with good oil pressure and no issues, great for a build or swap the parts and run as is. Would prefer to sell whole engine complete. Will deliver within 200 of 52302 miles for...

I just got my new 60 gallon upright off the truck and into the garage and am thinking about how I want to set this up. Should I bolt it down or leave on the pallet, do I want to build it it's own little room? I will probably have to rearrange some anyway so I would love to see or hear what...

I am going to have to give up my indoor parking spot for probably most of the winter and am thinking about getting some kind of cover. Vehicle will be parked on paved driveway. Dont want to spend an awfull lot but was thinking a cover would be better then none at all. What do you guys do when...

Was wondering if anybody else here has had a problem with Dodge Neon 3 speed automatic loosing park function? I am pretty sure transmission is shifting into park but the sprag doesn't hold. Am wondering if clip came off park rod on valve body or if thats a common problem?

Am looking for a gauge cluster for a 74 dart. Something decent good driver condition. Thanks.

Am looking for a steering wheel for a 74 dart. Want black with a center button but would consider others just needs to be driver quality, something in decent shape. Have went to manual steering on sons car and little wheel just don't cut it anymore.

I have a set of manifolds that were on a 360 that was swapped into a 75 duster and I am trying to identify. I was told they were 75 360 pieces but am having trouble confirming that by part no's. They are 3880905 and 3830684.

I am looking for a small block 4BBL throttle cable bracket to convert from 2 to 4BBL carb. I have a 3 piece kickdown assy so I am mainly looking for the mounting bracket but would consider the whole assembly if someone did not want to separate.

I just finished repainting my air cleaner with dupli-color hemi orange and the paint has very low gloss, smells like laquer, I dont think it's enamal unless they are using laquer type thinner to speed the drying. Anybody know a good high temp paint in a spray can that has some shine to it or...

I am going to need to replace tires on my 73 Dart. It has 205/70 R14's on 6" rims now. I want to stay 14" but am not finding alot to choose from in 14" tires anymore. I would like to use a more modern tire perhaps a T rated touring type. What is everybody running for 14" tires these days...

I have a 78 440 motorhome engine with around 60K on it I beleve. Engine is complete except for carb and some brackets may be missing. Ran very well when parked. It is a cast crank motor and has regular production heads on it. Would be a great engine to build or clean up and run as is. Am...

Am looking for a 7 1/4 sure grip unit. Anybody have one or seen one lately? Told a buddy of mine who is looking I would look around and see if I could round one up.