Search results for query: *

Well I have finally found the front SBP Centerlines I have been looking for now I just need to complete set and I need your help. I am in search of two 15x8.5" polished Small Bolt Pattern (5x4.00") Centerline Auto Drag wheels with a 3.50-3.75" backspacing. I would prefer to buy them straight...

I need help in determining if the following wheel and tire set up will fit under my stock 73' Duster rear fender and not rub against the stock located CalTrac leaf suspension. Any help would be appreciated. My concern is that the 4.875 backspacing might be too much and cause it rub against the...

In search of the following Mopar Small Bolt Pattern (5x4.00") Centerline wheels for my 73' Plymouth Duster. Looking for ones in good condition. No major dents or dings. No drilling for slicks. No trades. Must be willing to ship and accept paypal unless you live in the Pacific Northwest. Any...

SBC Mopar Single Plane Intake Manifold Stamped Part # P4452893 (with a small BB stamp on it as well) I'm having trouble finding exact specs on this manifold with it's unique part number. Another thread thought it was was for W2 heads. It is direct off my 73' Plymouth Duster 340 small block...

Hi all, I have a 73' Duster 340. It recently started sitting low in the front left to a point where if I turn the wheel it catches the fender. Initially I thought it was a bad torsion bar but I can't find any issue with it. During that inspection I found my shocks were shot so I upgraded both...

Small Block Mopar Valve Covers One drilled hole for PCV valve Overall in good condition Sold as pictured. Price: $80.00 Shipping: $20.00

4brl Carb Adapter with Carb Studs included Price: $25.00 Shipping: Included

Carter AFB Competition Series 750 CFM 4 BBL Carburetor Manual Choke Part# 9755s Works as advertised. Off my 1973 Plymouth Duster 340. Upgraded to a new 650 CFM. Sold as pictured with Edelbrock Single Feed Fuel Line Price: $140 Shipping from Spokane, WA: $20

Two gold rear arm rests off my 73' Plymouth Duster. Both are in overall great condition. Unused built in ash trays. Screws NOT included (you can get them on Classic Industries for $7.00 if you want the standard ones, other screws will work) The one has a broken alignment stud on the back...

Location: Spokane, WA The pictured Heater Box is the original from my 1973 Plymouth Duster. It is in great working condition with no leaks. The two vent tubes are included along with the firewall hole cover. Stamped on the back is part number 3701736. Let me know if you have any questions...

Basically new! It has 2 miles on it. No issues what so ever I just decided to go with a 750 CFM instead after a short test drive. Below are all the details. Edelbrock AVS2 650 CFM (part number 1905) 4 Barrel Carb Manual Choke Square Flange Gasoline Aluminum with Satin Finish Comes with: 1)...

Searching for someone willing to part with their small bolt pattern Centerline Auto Drag Wheels or looking for someone who still sells them. No trades. I'm searching for the following sizes: Rear Wheels: 15x8.5 and 3.75 BS Front Wheels: 15x3.5 and 2.00 BS

Two gold rear arm rests off my 73' Plymouth Duster. Both are in overall great condition. Unused built in ash trays. Screws NOT included (you can get them on Classic Industries for $7.00 if you want the standard ones, other screws will work) The one has a broken alignment stud on the back...

Searching for someone willing to part with their small bolt pattern Centerline Auto Drag Wheels or looking for someone who still sells them. I'm searching for the following sizes: Rear Wheels: 15x8.5 and 3.75 BS Front Wheels: 15x3.5 and 2.00 BS

Location: Spokane, WA I have the upper and lower rear fold down bench seat out of my 73' Duster for sale. They are in great condition with no major tears, scuffs or cuts. Hardware is not included. Packaged and ready to ship. Priced to sell. Rather see them used then sitting in my guest bedroom...

Location: Spokane, WA The pictured Heater Box is the original from my 1973 Plymouth Duster. It is in great working condition with no leaks. The two vent tubes are included along with the firewall hole cover. Stamped on the back is part number 3701736. Let me know if you have any questions...

I upgraded my 73' Duster 340 with a 140 amp Powermaster One Wire Alternator with an internal regulator (Powermaster 8-37529: Upgrade Alternator Chrome Finish | JEGS). Unfortunately, due to it's depth size, it will not fit in the stock alternator location/bracket. It hits the valve covers. I came...

Good morning all. I'm currently working on the rear brakes of my 73' Duster. I want to replace the drums but I'm having trouble finding the correct drums online or in stores. I was hoping one of you had a link to drums that would fit the specs below. Thank you! Bolt Spacing: 5×4 Shoe/Pad Size...

I'm currently working on my 1973 Plymouth Duster 340 and need some advice. To be upfront I am very new to car building and I'm learning as I go. My goal is to build a 10+ second car for the quarter while keeping it a 340. 1) I'm in the process of getting an 8 point roll cage professionally...

Location: Spokane, WA The pictured Heater Box is the original from my 1973 Plymouth Duster. It is in great working condition with no leaks. The two vent tubes are included along with the firewall hole cover. Stamped on the back is part number 3701736. Let me know if you have any questions...

$400.00 for both Shipping not included. Expect freight shipping from Spokane, Washington Gold Split Bench Front Seat Fold Down Rear Seat (Upper and Lower) Both are from my 1973 Plymouth Duster 340 and are in great condition. I'm currently modifying the interior for the strip and no longer...

I'm selling both the front and rear seats to my 1973 Plymouth Duster 340. As well as the seat belts. Front Seats: overall great condition, no stains, sliders in tact, minor imperfections (one to two locations with loose stitching), no hinge covers ($400 or reasonable b/o) Rear Fold-down Seat...

Turing to you all for help with this one. I've googled it and came up with no answer. What's the name of the plastic interior piece that covers the rear wells of a 73' Plymouth Duster? I'm rebuilding my interior and the old part number on one of them is "3551630 RH" and I need replacements. I've...