Search results for query: *

Thanks for the tip, I'll bring it to my buddies machine shop and use his press. Cheers.

Hi again everyone, I spaced the trunnion back 3/8" at the flange on the output shaft and WOW what a world of difference. Car lost all of the vibrations it had before. Over the winter I'm going to order a new trunnion and replace it. I really appreciate all the help from the forum. Thanks guys!

I'm going to try my rebuild kit and see if spacing the driveshaft back will help at all tonight as a last ditch before paying for a new driveshaft. Here is a video of the slop I'm talking about if anyone is curious: Thanks again for the help everyone, Cheers

Hi all, well the trunnion is definitely worn! I took it apart and it looks like a piece of the cap broke off. Looks like the grease inside dried up and it got very hot. I was careful to only use a small amount of grease when rebuilding the shaft not to throw off the balance, I believe Chrysler...

Thanks for all the info. The rebuild kit you listed is what I used for my ball and trunnion, it fit well. It's too bad they don't sell the actual housings. Thanks for the clever workaround idea, I never would've thought of that. Might be an option depending on how worn the housing is. My friend...

Thought so, thanks for giving me the conformation. I 'freshened up' the ball and trunnion a year ago while replacing the rubber boot, all I did was replace the needle bearings, balls and the caps that go over them so I'm a little puzzled. The vibration was still present back then but less...

Hi all, I've been having a persistent vibration around 40mph from my Valiant, while I was spinning the car up on the hoist, it sounded like a lot of vibration was coming from the Ball & Trunnion area. I was able to slightly rotate the trunnion (1/8th inch slop?) while holding the driveshaft...

Paint looks incredible. Excellent job.

You are correct the switch rides on the parking brake linkage, switch itself looks very similar to the courtesy light switches in the door frame. This one is not connected to the master cylinder in any way, would be neat if that was the case.

If you're curious I have that option in my 65 Valiant Convertible. Here is a pic of what it looks like. Looks a little hokey but it is handy to have. Not sure how common of an option it was. Nice wagon by the way.

Legendary Auto Interiors has new vinyl for 66 valiant 2 door rear seats, but only for signets I believe from the quick search I did. See link below: Classic Car Restoration | Upholstery & Parts | Legendary Auto Interiors You're lucky your front bench is in good shape, I do not know of any...

Weird, if the video is blocked you can download it from a link in the description. I usually download it since youtube will block out any heavily copyrighted stuff like Beatles songs. Here is the channel link with all their videos: https://www.youtube.com/channel/UClLMdBY27U64-kwO-PlX57w

There's a Youtube channel that just recently started putting out recordings of Los Angeles 93 KHJ BOSS Radio from the late 60s/early 70s really neat to listen to the old ads and music while working on the car/on a road trip. The Real Don Steele ones are awesome. Here is a link to one of the vids:

Ok thanks for the confirmation. I. lost the original screw when I rebuilt the carb somehow.

Hi all, I Ordered a screw for the fast idle cam on my Carter BBS (Tag Number: 3838s) My fast idle now works. But after looking at my throttle bracket my curb idle screw has no place to go. After looking at some old photos, it looks like the original BBS Fast Idle Cam Screw had a much larger...

Thank you El Viento that would be grand. I'll send you a private message and we can sort things out. The members on this site are incredible for sure, and have helped me loads with my odball Canadian Valiant. Hopefully this post can help people who are looking for that bushing. Thank you...

Thanks all for the feedback, glad I don't need to buy another bushing! I'll open up the manual and make sure I have all my rods set appropriately. I'll post an update once I do. One thing I did find is this older forum post where someone found a rectangular bushing that looks like it would fit...

Hi all, I'm pretty sure I'm missing another part to the throttle rod that connects to the Carter BBS on my slant, the previous owner used an old piece of hose with some effectivness, but I'm trying to get rid of the excess slop. I ordered a new "Throttle Rod Insulator" bushing but it looks...

Overdrive thank you so much! Nice to know that the fender tags & the vin all match up. This thread should hopefully be a big help to anyone else with Canadian Valiants. Cheers!

Sorry for the slow reply all. I ended up using the two-piece. BillGrissom you are correct you do not need to take the upper control arm & upper ball joint out. Thanks for your advice everyone!

Ok. Looks like I'll install the two piece bushings. Thanks for the advice guys!

Hi all, I'm putting together the front suspension for my 1965 valiant and have the front strut rods out. Looks like there are two styles of replacement bushings I can get. There is the moog "improved design" kit where the bushing is two part. Could also get a one piece bushing. The original was...

Stupid question but make sure it's not popping off because the holes you're screwing into are stripped out. Mine were, previous owner used hillbilly wood screws to hold the trim ring in. Hope you have some good luck.

They also sell them on rock auto: 1965 PLYMOUTH VALIANT 3.7L 225cid L6 Thermostat Housing / Water Outlet | RockAuto I got mine from there. (Four Seasons Part No: 84837) It fit nice but I haven't fired the motor up yet.

Just took a look at my 65 valiant. Looking at the star latch on the drivers door, it turns freely counterclockwise. You can hear a tooth ratcheting (clicking) as you turn it. I was able to turn it very slightly clockwise until it stopped, assuming it hit that ratchet. If you can turn it either...

Agreed. Stuff works great if you've got a bit of squeak from the hinges as well.

Don't think there is a right or left side. I have two sets and each one is identical. You'll find out if the beams don't line up lol.

Having the same issue with my 65 Valiant. Let me know if you figure out the trick to it. I'll touch base if I have any luck. Cheers, Jack

Gorgeous. Love the patina on it. Plus two doors! That's a nice find. Cheers, Jack

Sorry for the slow reply. Slowly putting the car back together after repairing the rot. Pics below of car before, during and after painting . All in all did two front fenders, two quarters and some small work on doors. Welcome to Canadian cars lol. See last photo for a pic of the trim. As far as...