Search results for query: *

Nice aluminum bell housing for small block mopar. No cracks and all threads are good. Tapped holes have been chased with tap to remove grime and checked with a bolt for proper engagement (not stripped). Stamping number is shown in one of the pictures so you can confirm specs / fitment if...

This is an 8HP70 transmission from a 2017 Challenger. Came with a 392 Hemi that I am using in my build, but I’m going with a manual transmission. I was told it has 34K miles on it. Converter and cooler lines included. $800 Marshalltown, IA 50158 Prefer not to ship

Aluminum small block bell housing. All tapped holes have good threads and now cracks anywhere. Dust shield and inspection cover also included (not pictured). $275 plus shipping Marshalltown. IA. 50158

Completely rebuilt clutch / brake pedal assembly. All new bushings, pads, etc. Fully disassembled, cleaned, painted, and assembled with all new nylon bushings/etc. Return spring included $500 - plus shipping Marshalltown, IA 50158

1972 Dart/Demon Passenger Headlight Bezel. Minor scuffing on bottom edge, but likely hidden under bumper edge once installed. No cracks or chips otherwise. $40 plus shipping Marshalltown, IA 50158

Set of original chrome door handles removed from 1971 Demon. Use as-is, or have them re-chromed for a like-new finish. $40obo - plus shipping Marshalltown, IA 50158

Removed from 1971 Demon. Overall in very good condition. 2 electrical pins on back circuit board are damaged/bent, but can still be saved with a solder job. No chips or cracks $150 - plus shipping Marshalltown, IA 50158

Dash gauge cluster front face plate. Notice lower-right corner has a chip broken out (I do not have the missing piece). Large rectangular opening for factory speedo was clearanced by someone previously to allow fitment of an aftermarket speedo assembly. Offering to anyone who may be...

Original Amp Gauge and Temp Gauge removed from 1972-1976 standard dash cluster assembly. Both gauge respond to a 12V signal, so I am assuming they both function as they should. $50ea or both for $80... plus shipping Marshalltown, IA 50158

Removed from 1971 Demon Good condition $15 + shipping Marshalltown, IA 50158

Used, original set of rear leaf spring shackles $25 + shipping Marshalltown, IA 50158

Removed from 1971 Demon. Chrome finish is not "100% Perfect"... but I would consider it very nice... better than driver quality. $40 obo + shipping Marshalltown, IA 50158

Leftover parts from couple different steering columns that I used to rebuild my column. Everything pictured for 1 price. Green Upper shift housings are a full set for column shift. $50 plus shipping Marshalltown, IA

Full rebuilt clutch/brake pedal assembly. I rebuilt this for my 71 Demon, but have decided on another route. Had it bolted to the firewall, but zero miles on it. This is the "light duty" version with the nylon bushings (new). Location - Marshalltown, Iowa 50158 Price - $600 + shipping...

These are the original bumpers off my 71 Demon project. Front will fit 70-71 Dart/Demon, Rear will fit Dart, Demon, Duster, or 67-71 Valient. Original chrome on these was in poor condition. Not rusted, just blemished. I was planning to paint these in body color. Rear bumper has only 2-3...

These are brand new front and rear chrome bumpers from AMD. I received these late last week and found very minor defects in the chrome. In the pictures, you can see hairline "scratches" in the finish. Personally, i think these were scratches in the base metal before the chrome was applied...

100% Fully rebuilt transmission with 0 miles following rebuild. All new synchros, bearings, gaskets, reverse switch, etc. Comes complete with the Hurst Competition Plus shifter, shifter lever, fork & linkages, and an aluminum SBM bell housing (black or silver in picture). Dark grey bell...

SBM oil pan, valve covers, battery tray, shackles, driver’s side chrome mirror body (needs new glass), gas tank vent tube. Other than the pan and valve covers, everything else came from my 71 Demon. All sold together $100 (obo) for all (+ shipping) Marshalltown, IA

Reconditioned original 10.5" Mopar small block bellhousing cast #2843887 (cast iron) to fit 1968 A-body small block 4-speed applications, 4.354" bearing retainer opening, uses 130 tooth flywheel. Bellhousing cleaned, bead blasted and primed, ready to paint. No cracks. Also includes lower...

I have 2 standard-bore 360LA engine blocks with crankshafts available. Both are in excellent condition. I previously cleaned the cylinder bores on each for visual inspection / measurement, and then applied a heavy coating of lithium grease on all surface to prevent corrosion while in storage...

These were on my 71 Demon prior to installing the full 3" relocation kit. Rear shackles use 1 straight link and 1 curved link... but the system works and results in an approximate 0.75" inward offset. The lower "pin" on the rear shackles uses an extra bushing to secure the leaf. Splines on...

Original SBM valve covers. Obviously will need cleaned up and repainted. Marshalltown, IA 50158 $40 / set plus shipping or $70 for both sets (plus shipping)

Brand new, never installed set of front mounts from Hotchkiss. Black powdercoat. Front mounts came with the new leaf spring kit I purchased from Hotchkiss, but were not used because I am also running the 3" inboard offset front boxes/mounts. Rear shackles are used. Cleaned up and ready for...

Removed from my 71 Demon. Very good condition. Only soft lines were cut, so ready to install with new soft lines. Marshalltown, IA 50158 $50 plus shipping

Excellent driver condition 71 chrome mirror body - Driver Side. Has some minor scuffs, but overall good condition. I attempted polishing by hand. Might clean up even better with power-polishing. No glass Marshalltown, IA 50158 $50 plus shipping

Removed from 71 Demon. Good usable condition Marshalltown, IA 50158 $20 plus shipping

Good set of torsion bars - numbered 892/893 on the ends. 0.87" diameter (small block) Marshalltown, IA 50158 $50 plus shipping

1971-1972 Dodge Demon Fiberglass front bumper and front valance. Unsure on brand. Never installed. No cracks... nice condition. Price is for the pair. AAR fiberglass is over 420 for the pair plus tax and shipping. PM with any questions. Thanks Located in Marshalltown, IA 50158 $300 +...

73+ A-Body front disc brake assembly. These were installed on my 71 Demon by previous owner, but have they never seen the road. (They've actually never seen brake fluid) I was told that the calipers, rotors, and pads were new... and I have no reason to doubt that. All were purchased a few...

What shocks are you guys running with your lowered cars? Were you able to still use "standard length" shocks, or did you need to go to a different compressed/extended length due to being lowered? My build is noted below for reference. (following some of what has been done by @72bluNblu with...