Search results for query: *

So got back to this during the weekend.. ran new wire for field and jumped from VR ign to new VR FLD and get less than 12 at the alt field and nothing more than 12.3 at alt post even with increasing RPM.

Thanks again for the info... this is a little beyond me. Is there anything I should check to know why the VR line is blowing?

So some more info.. with jumper on fld to 12v side of battery the alt post goes up to 13.2.. I was not able to Rev the motor and test at same time to see if this increased more but is more than I was getting. I also checked the new VR I thought might have blown also and it has a blown wire...

Round back... will give the jumper a try tonight after work.. will reply back with results.. thanks everyone for the suggestions

Yep pre electronic and single field wire

So I have been trying to chase an issue with my battery not showing it is charging. When I test at the battery with the key off I am at 12.6, running around 12.3/12.4 never appears to be charging. Below is everything I have done and just looking for suggestions. Had Alt tested at local auto...

Has not sold yet

Looks like 5 inch from bottom of pump to bottom of pickup.. see pics

Not sure... I can try to get height but was in a 8qt pan

Still available

These are off a 1966 Barracuda and look to have a good amount of life left if turned. They have the reverse threads on the driver side studs. Price: $60 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis IN Payment: Venmo...

Small Block High volume Oil pump with pickup tube. Came out of 340 Price: $60 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis IN Payment: Venmo, Paypal, cash No Holds, Cross Posted, First Come First Serve.

Used 64-66 Barracuda Rear Window Interior Corner Trim Moldings. One has a cracked corner that should not be visible when installed and as most have some wave due to heat over the years. These would be good once repainted. Price: $40 for set Will ship but buyer responsible for shipping costs...

Door Pull, Front and back window cranks with screw. Good condition out of a 1966 Barracuda Door Pulls - $20 for set Front Window Cranks - $20 for set Back Window Cranks - $20 for set Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to...

Rubber Transmission mount 1-stud - New Price: $10 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis IN Payment: Venmo, Paypal, cash No Holds, Cross Posted, First Come First Serve.

New Spindle and Lower control arm ball joint with new bushings. I bought a kit for front end suspension and also a new disc brake conversion so have extra set. Price: $65 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis...

Rear shackle hangers off a 1966 Barracuda, blasted and powder coated ready for installation. Price: $40 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis IN Payment: Venmo, Paypal, cash No Holds, Cross Posted, First Come...

New in box DEI Starter heat wrap. Bought 2 by mistake and could not return. Part number: 010402, size 7x24 can be cut down to fit your application Price: $15 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis IN Payment...

I have a set of New PST Torsion Bars (TOR4820) for sale. I bought these and could not get them to work with the new headers I installed so went back stock size. These are 1.03 and they were installed and removed but never had the full load of the car on them. Wish I could have used them but...

Pm sent

Looking for passenger side rear window regulator for 1966 barracuda.. mine has a few broken teeth so won't fully roll up without pulling on the window.

Small Ball joint Upper Control Arms with new Bushings and Ball joint. Blasted and Powder coated black. I changed to large ball joint from QA1 only reason for not using these. Price: $160 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance...

1964-66 Dodge, Plymouth A/B Body Black Rear Arm Pads with Ash Try cut out. New in packaging Part number MF1754 Price: $45 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis IN Payment: Venmo, Paypal, cash

1964/65/66 Barracuda Black Headliner from legendary p/n: HL65CB101F Price: $90 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis IN Payment: Venmo, Paypal, cash

Small Block Aluminum Water Pump. New but I did install then realized it would not work for my application so removed (never ran with it installed). Price: $45 Will ship but buyer responsible for shipping costs from 46142 or can meet up within reasonable distance to Indianapolis IN Payment...

Starter for Small Block 273/318/340/360 - this was in a 340 and worked without issue. Replaced due to needing a high torque without a nose cone to fit without having to remove headers. Will ship but buyer responsible for shipping costs or can meet up within reasonable distance to Indianapolis...

you are correct... updated post

I have a 7 1/4 Rear End out of a 1966 Barracuda with small bolt pattern and driver side is reverse threaded, Open Diff, I am good with giving away if anyone has a need for one. Worked great during the 2 years I drove the car but changed to 8 3/4 this year. Just have to pick up, South Side of...

Engine Oil Filter Relocation Kit - 15748 Opened and mocked up on engine but went another direction due to header location. Price: $40 Will ship but buyer responsible for shipping costs or can meet up within reasonable distance to Indianapolis IN Payment: Venmo, Paypal, cash No Holds...

456 Richmond Gears Mopar 8 3/4 742 Case. Price: $85 Payment: Venmo, Paypal, cash Will ship but buyer responsible for shipping costs or can meet up within reasonable distance to Indianapolis IN