Search results for query: *

Looking for 1-2 of these original style fuel line inlet fittings for a sixpack setup. Note the rounded shoulder where it meets the bowl. The hex head is 11/16. Looking for un-boogered ones. Thanks for the ad!

Part of an auto store clean out. I have four of these electronic choke assemblies. All are unused with no box. I believe these correlate to Mopar part numbers 3698355 and 3751484 and will work on most 1973-82 V-8 applications. Brand unknown. Asking $15 each plus shipping from MD. Additional pics...

Original dual groove crank pulley, part number 2946789 with asymmetric bolt holes. Correct for 1970-71 340/383/440 engines with power steering. Pulley has been stripped and painted. The interior portion has some pitting and was painted a flat black, the back side is excellent and was finished in...

Original harmonic balancer from a 1972 340 w/forged crankshaft, casting number 3614369 and matching dual groove crank pulley, part number 3614378 (symmetric bolt holes). Balancer is in excellent condition. Pulley has been stripped and primed and has some minor pitting. $125 plus shipping or free...

Empty 742 case with large yoke, caps, and adjusters. Includes 3.23 ring and pinion. $125 plus shipping. Free delivery to Carlisle or the Nats. Parts located in MD. SALE PENDING Thanks for the ad!

Nice original 228 oil pan correct for 1973 A/B/E with 340. No dents and only light-scale rust. Should clean up without any significant pitting. $50 plus shipping. Free delivery to Carlisle or the Nats. Part is in MD. Thanks for the ad!

Carter 10-202 Strip Kit for all AVS, and all OEM AFB carburetors with 3-step rods and high step primary jets. Kit is missing two sets of metering jets (part 120-489 and part 120-377) as shown in the photos. All other parts listed on the diagram are included and are un-used. $100 plus shipping...

Looking for 1-2 of these original style fuel line inlet fittings for a sixpack setup. Pretty sure other Holley carbs used these during the late 60s-early 70s. Looking for un-boogered ones. Thanks for the ad!

Carter AVS 9611SA. Nice unrestored original with "A9" (Jan 1969) date code. $200 plus shipping from MD. Thanks for the ad!

Part of an auto store clean out. I have four of these choke assemblies. All are unused with no box but in very nice condition. I believe these correlate to Carter Part number 170-878, which is correct for 1966-67 273 with Carter 2-BBL. Brand unknown. Asking $25 each plus shipping from MD...

Part of an auto store clean out. I have four of these choke assemblies. All are unused with no box but in very nice condition. I believe these correlate to Carter Part number 170-817, which is correct for 1965-66 273 Carter AFB 4bbl. Brand unknown. Asking $50 each plus shipping from MD...

Part of an auto store clean out. I have four of these electronic choke assemblies. All are unused with no box. I believe these correlate to Mopar part numbers 3698355 and 3751484 and will work on most 1973-82 V-8 applications. Brand unknown. Asking $15 each plus shipping from MD. Additional...

I have 6 NOS Mopar Left Hand (LH) 7/16-20 wheel studs. $10 each or $50 for all 6 plus shipping. Thanks for the ad!

I have two NOS after market RH exhaust manifold gaskets, correct for 1965 only 273. Very minor surface rust on a portion of one of the gaskets, otherwise in excellent condition. I believe these correlate to Mopar part# 2465842. $25 each or $40 for both plus shipping. Thanks for the ad.

Clean with no issues. Used recently for an engine break in. $100 with delivery to Carlisle or the Nats. SALE PENDING Thanks for the ad!

Nice original inspection cover for 273 manual transmission 9.5” bellhousing. Should clean up nicely without any significant pitting. $80 plus shipping from Maryland. Thanks for the ad!

Kit is in very nice condition. $50 plus shipping. Thanks!

Nice shape with all pages. No significant damage but has some fingertip stains. $15 plus shipping Thanks for the ad!

NOS and in excellent condition. $60 plus shipping. Thanks for the ad!

Purchased about 20 years ago. Never opened. Size XL. $80 plus shipping. Thanks for the ad!

I had my 1970 340 motor built a number of years ago and it sat wrapped up on an engine stand until recently. I went through the motor again and swapped out the cam shaft, lifters, timing chain set, oil pan, and and cylinder head bolts. I went with a Mr. Sixpack cam and the other parts were...

Passenger side mirror. Chrome is presentable with minor flaws. Small dent visible in last pic. Good core for restoring. No glass/insert. Additional pics on request. $20 plus shipping from MD. SOLD Thanks for the ad!

Looking for a mint or NOS rubber cushion for a 70 Challenger. I am pretty sure Darts use the same part. Thanks for the ad!

I have a partial set of restored A-Body bucket seat tracks out of a 1970 Duster. I am not 100 percent sure what other years they fit but would assume 70-71 at least. These are the inner tracks, both LH and RH. Tracks were fully disassembled, cleaned/stripped, painted, greased and reassembled...

Anyone recognize this style motor mount? Got it along with a bunch of mixed parts. Thanks

Nice original 228 oil pan correct for 1973-74 A/B/E with 340. No dents and only light-scale rust. Should clean up without any significant pitting. $50 plus shipping. Free delivery to Carlisle or the Nats. Part is in MD. Thanks for the ad!

What’s a fair asking price for a pretty nice 394 pan? This one has one minor dent in the bottom and appears to be original paint. This should clean up without any significant pitting. Thanks!

Trying to figure out what seat tracks I have. I am not very smart on A-body parts. These were taken off 1970 Duster seats (based on the seat coverings). The outers match my E-body tracks and are dated late 1969. Did A-bodies use these too? The inners seem to match pics of 70-71 A-body...

Has anyone seen the type bolt at the far right of this pic? Original or something else? The other two look right for 70-71 340s. The odd one has a 3/4” head. Wondering if it might be from a 273 motor?

Hello - I need a couple of parts for a 70 A-body bucket seat track I am working on. I need a seat adjustment spring and a metal ball bearing/roller cage/retainer. See pics. Broken cage is at the bottom of pic 2. Many thanks!