Search results for query: *

I have a 66 Barracuda with a 273. No AC, little four blade fan. Today while tinkering and hitting a standstill with the carb I pulled the fan and spacer as put on a five blade with an Eaton thermostatic clutch. Fit the pulley fine, bolts to the water pump fine. Was almost happy.... Till I...

So far here is what I am starting out with. I have a bare 360 block that is .060 over. The machine work has been done and it is fresh, its sitting on the stand ready to go. A wrist pin let go and scored a cylinder so it was resleeved and bored out. Casting numbers on the block are...

Need an accelerator cable for a 1966 Plymouth Barracuda. With an auto, 318, 4bbl (Carter on an Edelbrock manifold) The one from a Duster is too long and I cant get it to work without binding. Need a shorter one. In Elko, NV

Im looking to find a shroud to go on my current radiator (stock with a 273) or is there an upgraded better cooling aftermarket radiator shroud combo. I am putting a 360 in the car that is bored .060 over. I am worried about it running a little to hot. I am not against running electric fans...

What are my options as far as exhaust manifolds go for my 66 Barracuda. I have a 360 I want to drop in and I have the stock 273 exhaust manifolds. Is there a better performance option out there. I do not want to cut the fender wells or bend or remove anything. Willing to go to headers if...

What do I need to get to put a 904 behind a 360? Have a 66 barracuda that I want to drop a 360 in. I would like to keep the 904 in there after I have it gone through.

I have a nice freshly machined 360 that was on the stand covered. Over the weekend a water line going to my washer burst and sprayed hot steam and water for 2 days. I was out of town when it happened. Pulled the cover off of my block and it is flash rusted. Bores are clean but a lot of...

How do I get that damn thing out of the car? I wiggle and twist to no avail. Need a suggestion or tip. Thanks

Need info to know if this is worth it. I got two of them. One the circuit board is burned and the other looks ok. I just have the module though. Has anyone ever used one? Is there a diagram for how to rig it up? So far i have not found much on the net. Mostly just links to ebay for crap...

It was out of a Challenger. Its missing the shafts. Has to have the carrier put back in and was sitting behind a garage in the open the last couple of years. Its free and i would like to know if it would fit in my 66 BC without much modification. I want to swap out the 7-1/4 for...

My tank had some sludge in it. I have two filters inline one metal and one clear. I let the car sit for a year (problems) and now I have two clogged filters and a nasty carb now. Those are easy enought to fix but what do I do about the tank? where do I take it too get cleaned or is it...

Anyone else from NV?

This is on my 85 Ramcharger. the problem started when i jump started someone. it has a 318 2bbl 727 and is 4x. still has the lean burn and is pretty stock. what is happening is it seems to be dying. its very sporadic. the night i drove home after giving the guy a jump i saw my lights...