Search results for query: *

Insulators

ACC57Y Accurate Exhaust not cheap $604.90 comes with the intermediate pipe. A Body Y-Pipe with Intermediate Pipe (Set)-Y-Pipes

Yes, beware or you will end up with paper weight hubs.

In 63 they used 2 different bearing, I am not sure about the seals. Best to take it apart and get the bearing and seal numbers off the old parts.

Both sides are the same part number for future reference.

Have you tried Facebook Market place?

I checked AMS obsolete, Len Dawson and Old Car Parts Northwest no luck. I would check with the Australian vendors and see if it is the same as one of their models. Australian Chryslers Imported Car Models Automotive Restoration here is one company.

Does anyone have a original part number for it?

There is a guy on The Early Valiant and Barracuda Facebook page that is in the early stages of manufacturing 64-65 Valiant and Barracuda taillight lenses you may want to look him up, he has quite a few posts with pictures of what he is doing. His name is Randy Breidel. I know my lead is not for...

I am surprised that Dorman doesn't sell them.

Not sure how they line up as far as overall width or spring perch width, but a lot of Ford vans and E model cab/ chassis used Dana 60s and 70s and 70hd rears that could be an option for you.

Since you did not state what year the car or engine were, be aware that 67 and earlier engines use the small hub converters, and you can't put a large hub converter into a small hub crank.

I think Doug Dutra had a few until his shop burned down.

73-74 A and C slant 6s and 318 68-69 A body 383 1851960 is the P/N All per Galen parts book #2

Just the 273s all other v8s are large hub. Go back to 61 and they had a flat flange and no hub but 8 bolts on v8s

I think RustyRatRod has 1 for sale in the for sale adds I think it is for auto application which you can plug off. Here is the other end of the spectrum. Dodge Dart 1966 Radiators | US Radiator

What about Woodruff one of our sponsors Carburetor Restoration in Youngstown, OH | Woodruff Carburetor Specialties (carburetorrestorationyoungstownoh.com)

You may want to try and contact Doug Dutra over on slantsix.org

Yep that's a 63 Valiant panel

By the way those rods have a different part number at least in 63 one for the 170 and one for the 225. My guess is the 225 is longer as the 225 has a taller deck.

Do you want original or aftermarket ?

The 1st question is do you want to keep your Small bolt patterned 13 inch wheels ? and if not what wheel and tire size do you want.

Casting number 2465523 64-66 273 4 speed bellhousing 9 1/2 inch clutch

Here is 1 on eBay Mopar NOS Tail Lamp Lens (Early Type Pattern) Rt. 64 Valiant (Except S/Wagon) | eBay

These are pictures of a varible speed wiper motor from a 64-66 A body that I sent you the PM about note it has 2 wire connectors a single speed will only have 1 Note the part number ERQ4006 should be the same as yours

Here you go Cheap Defrost Hose Fix | For A Bodies Only Mopar Forum

Sounds like you want a whole dash rebuilt.

Maybe one from a A903 3 speed will work.

318 polly before 62 maybe 8 bolt.

Are those part numbers for large or small sector boxes ?