Search results for query: *

yes I mean the fitting for the fuel in and out location of the filter. seems like when I measure is it is .695 id so does that make it a 5/8 npt ?

Well folks i have looked everywhere for some of these with no luck i need 4 pieces of a 90 degree brass fitting for my hpg-1 fram fuel filter and electric pump. I know it takes a 6 an aluminum fitting but what size is it in a brass fitting? So it's male 6 an with a 3/8 barb for fuel line.

Hi folks i'm looking for a set ( 2 pc) of rear brake line that run from each wheel(drum) to the y block on the housing. Used is fine o.e m or staineless is also fine. Car is a 68 barracuda thanks terry

hi i'm looking for a complete 383 engine for my 70 duster. would like something that has all the brackets for alt. & pwr steering.would also like it to be a forged crank motor. i'm in southern ca. zip 93021. pm me with pricing and location

pm sent

Hi folks i'm looking for a good used 518 trans for a 1999 dakota with a v-6. its computer driven and a overdrive.this is my grandsons truck. Thanks Terry

Hi folks i'm looking for a fuel pump regulator with a by pass port for my mallory 140 fuel pump. can be used.

pm sent

thanks folks i found them on e-bay. jegs had the correct rubber ones.

fishy68 the link you gave is for a 7/8 bushing. i need 1 inch. i spent about 1/2 at my local o'reilleys trying to explain to them my need. most of the bushings offered do not even list there size. they are on ebay but i thought i would try here first. and i was looking for new not used.i already...

hi i'm looking for 4 rubber 1 inch shackle bushings for a 70 duster anyone have some? thanks terry

hi folks,i'm looking to rebuild a pair of leaf springs from a 340 duster.there 6 leafs to each side so i need a kit with the plastic inserts,aluminum spacers etc anybody have one? just pm me with what you may have. thanks terry

hi folks, well once again i have put something away in a safe spot only to not find it i am looking for a set of torsion bars adjusting bolts & blocks for my 70 duster,please pm me if you have any thanks terry

thanks dartgame !!!!! i'm sure they will help. terry

hi folks i'm just trying to fine tune my holley 750 and am looking for a couple of squirters any size from 33 to 37 and the high flow screw for the size 35 and up. maybe someone has them left over from there trial and error thanks terry

spring fling is just around the corner.i'm sure he can find some there and save on shipping

pm sent

pm sent

pm sent

received the hardware today thanks a million.i tried to leave a positive feedback BUT they ask for a deal thread url. have no clue to its meaning terry

pm sent

have you tried adjusting the torsion bars up at all? and have you tried a bigger set of front shocks? this would help

pm sent

let me look today i know i have a white ball and the adapters from a hurst kit i bought. terry

pm sent

could you use a threaded adapter to get the correct threads? they must be cheaper and everybody gets a few of these when they buy a shifter handle terry

hi folks i'm in the process of building a 440 from scratch. what i am looking for is the bolts and studs nuts and washers for one of these motors, i know i can get the main items from arp in one of there kits but i will still need for example oil pump,oil pan,distributor,valve cover ,timing...

hi moto i have a brand new red pump. hows 60 dollars plus shipping terry

pm sent

pm sent