Search results for query: *

  1. C

    what can you tell me about these trans xmembers?

    Thanks! The bottom one is what came out of my car. Went out and looked at my old trans and found that braket i need.
  3. C

    what can you tell me about these trans xmembers?

    Hello! One of these crossmembers came out of my 73 swinger /6 904 car, the other came out of a 73+ v8 swinger in a junk yard. Im putting a 318 and 727 in my car. Went to the local parts shop to get a new trans mount.. they gave me a funny looking round bushing that i dont understand :/...
  4. C

    valve body missing the down shift assy?

    Hmm. Well, i guess im gonna leave the ball bearing out and use their governor plug and see what happens. Thanks for your reply. Cameron
  5. C

    valve body missing the down shift assy?

    Hey folks, Im still working on that rebuild on my 67 727. I am trying to install the b and m shift kit while im in here but i ran into an issue. The down shift assy part of the valve body wasnt there! Just an end plate. I wanted this to shift manually so theres a ball bearing im supposed to add...
  6. C

    front pump gears the same in 67 727 vs 74 and up?

    Hello, Tearing into my 727 and the front pump gears have some rust. I have another pump, but it has the plastic bevel like the 74 and up style. Are the gears interchangeable? Thanks! Cameron
  8. C

    output shaft bearing removal trouble

    Hello folks, Im trying to tear down my 727 for a rebuild and ran into a major snag! I have removed the tailshaft housing and the snap ring behind the output shaft bearing, and i have moved the snap ring in front of the bearing forward. There is a ridge behind the rear snap ring that the bearing...
  9. C

    atc pro king?

    Does anyone have any knowledge of the atc pro king 727 rebuild kit that autozone sells? Part # ks 18
  10. C

    DIY 727 build?

    Good thread! I was looking into buying this dvd as well. I bought the paul zank video for rebuilding the rear end.. did not have specific info on the 8.25 like I was hoping, but was a great help and very educational.
  11. C

    8.25 housing cast or forged?

    Thank you! That is exactly what I wanted to hear :) Now I can get to work.
  12. C

    8.25 housing cast or forged?

    ..anyone? The perches on the rear end I've got are an inch too wide. I would rather move the perches in than move the springs out to keep plenty of room for bigger wheels/tires. I was told that if it is cast (my cousin can weld cast) the welds would be brittle and would break. Any input...
  14. C

    8.25 housing cast or forged?

    Hello, Is the the 8.25 rear end housing cast or forged?? Thanks, Cameron
Back
Top