Search results for query: *

  1. Dust1

    Instability Question

    Yes Joe, I asked Ron if he used stock specs. He said yes. He sat down and read the Mopar Action publication and we talked about it some. He said he was open to new ideas and went to work. He also found and fixed a problem with the Pitman and Idler arms that largely was responsible for the...
  2. Dust1

    Instability Question

    Instability problem solved! Thanks Dave, the Skosh Chart you recommended was viewed and helped Ron dial it in for me. Mean Green has never driven and handled better! Here are the specs Ron used. Left Front Right Front -0.37* Camber...
  3. Dust1

    Instability Question

    Ok Dave. I read your earlier post the 1st time and copied it, all 5 pages! I plan on discusing these specs with my alignment guy. I also look at all other possibilities to be on the smart side. I examine all the possibilities and elliminate them one at a time until the car handles. Thanks again...
  4. Dust1

    Instability Question

    Yes, as I said in an earlier post. I went from a 71 disc brake setup to a 73-76 BBP disc brake setup. swapped the spindles side to side to mount the brakes in the rear to clear the sway bar and such. Something definately changed the dynamics for sure. Can't change it back now, just need to know...
  5. Dust1

    Instability Question

    I am betting that you are right Joe. I think Ron will fix me up. It doesn't hurt me to gain some knowledge from my forum friends before I take it back. What are forum friends for!?
  6. Dust1

    Instability Question

    The only way I can reply to that Joe. Grilliot's Alignment shop. It is their specialty. They have been in business since the Model T. Probably 3rd generation. Ron Grilliot, the current owner is older than I. He aligned it himself. Every hotrodder and musclecar owner in the area take it to Ron...
  7. Dust1

    Instability Question

    Ok forum friends, now I think we are getting somewhere on this problem I am having with Mean Green. I researched "Bump Steer" like Green1 suggested. While I was looking the Duster over yesterday, checking all the components for looseness, I didn't find any looseness. I did notice that when...
  8. Dust1

    Instability Question

    Y ou have a very valid point there Blownfish. I will take it back to the alignment shop with my concerns. Thanks all!
  9. Dust1

    Instability Question

    It really is not likely that the alignment is not correct. I got the very best shop in the area to do it. They are good. They told me to bring it back and they will check it out. I forgot to mention I replaced all steering components too, except pitman and idler arms. All new. Hooker...
  10. Dust1

    Instability Question

    I recently replaced all suspension components on my 71 Duster and got a front end alignment from a reputable shop in the area. I have a serious issue. Whenever I hit a rise in the road, go over a bump or a bridge the car gets real unstable and wants to veer to the right ditch! It is very...
Back
Top