Search results for query: *

  1. G

    JB Weld Ball Joints?

    my re-mark was intended for green guy
  3. G

    JB Weld Ball Joints?

    Your a lot of help ..if thats all you have to say go away you must be single:wack:
  4. G

    Offset shackles and perches

    YES,you should also move front spring-eye in-board 3/4" If your still interested , i can tell you how in more de-tail Let me know,P.M. me anytime! VEERRrry NICE DUSTER drool,drool..HAPPY 4th. THANK A VET ALL GAVE SOME....SOME GAVE ALL!!
  5. G

    Offset shackles and perches

    YES you should also re-locate front spring eye braket!! Let me know if your still interested, and i`ll try to tell you how in more de-tail...Happy 4th. Thank a vet... ALL GAVE SOME.....SOME GAVE ALL.....
  6. G

    Offset shackles and perches

    Pinion angle should be measured at ride hight. That means all 4wheel and (tires you are going to run, example; 26inch skinnies in the front and 28.50 slicks in the rear. with engine,trans,driveshaft and rearend hooked up.you`ll need an angle finder,Hold on a sec. Try this; Go to Mopar...
  8. G

    pitman arm won't come off

    i apolagize to anyone i offended.. i may be to old for this site!!!
  9. G

    pitman arm won't come off

    Who said it was rusted? You know he has already soaked it and wire brushed it. He owns aMOPAR so you know he`s smart,'JUST aSTUBBORN ARM PIT!!
  10. G

    pitman arm won't come off

    Won`t become brittle if you let it cool down slowly.DON`T quench it!!!
  11. G

    pitman arm won't come off

    With enough heat you can move a mountain! thats alot of iron to heat at once,so use oxy. accyleane torch no.5 tip or rosebud.Heat while applying pressure with puller.Leave a full nut on it, helps keep things together when it slides off.Did`nt want to ruin my good puller (to much heat ) Went to...
Back
Top