Search results for query: *

The 75 vent was recirculated back to the engine. You'll need a vented cap for the 70 tank.

I don't have a picture, but I'm pretty any a-body tank strap will work.

Mr Gasket 2081 Air Cleaner Stud + Smog Tube Fitting PCV 5/8 3/4 1" Chevy Ford Mr Gasket 2081 | eBay

Well I put a Eddy 750 AFB I had lying around, and problem solved! It runs smoother with no hesitation. I guess the Holley needs some work?

I think I'll swap out a street demon carb I have on another car that I know works well and see if the problem goes away before l start messing with this Holley carb. By the way this is a vacuum secondary street master on a 340 with a pretty hot cam so I'm not to sure it's over carbed?. The u...

Do you think, how can I check for this? I know very little about vacuum secondary Holleys

Well the car has just recently restored (not by me) and the filter looks new.

I watch the video, thanks for posting it, but I my problem is not with the initial throttle, normal driving it's fine it's when get in the into it that it falls flat then picks back in abit but the secondaries nevr seem to kick in. That’s why I was thinking maybe it's get starved for fuel

I just bought a car with a Holley streetmaster carb and it has a lot of hesitation when you get on it. I happen to notice that someone mounted the fuel filter before the mechical pump. Would this cause a problem with fuel flow?

I guess it's all about opinion, and application as well.

To help answer the OP's question, I don't have a stock air cleaner, but I have a drop type base on mine which doesn't clear and AFB(AVS) with an electronic choke but it fits the Street Demon just fine. The Street Demon is not a spread bore, the secondaries are a "goggle valve" type flap that...

3 pages on about what carburetor is best or worse! And no one has been able to answer the Op's original questions and only a couple have tried. Can we just stick to the topic on these threads! :BangHead:

Thanks, it's been a while since I installed it so I'm not how I put it in!

I'm pretty sure it's the right pump, but I would like to know if it's possible I could have just installed it wrong or do I need to replace it.

I tried to start the 340 I installed in my Barracuda, but the mechanical fuel pump is not pumping. I was able to pull fuel through the line (and fuel pump). This is a new pump I installed that I got cheap from Ebay so I'm not sure if it's any good. My question is possible to install it...