Search results for query: *

The ones I needed were the same in the automatic brake pedal, so I got lucky there because that's what I was able to find. The 4spd pedals can in a standard and heavy duty, the standard sized ones are what I needed and they are impossible to find new

I did not, I ended up finding another pedal assembly that had decent outer bushings and used thoses

i would grab the bell housing even if you can't use it. If its a good deal you can sell it to the slant guys

mvrcorp, we are talking about different parts. You are talking about the Zbar/ball stud bushings. I am talking about the little plastic bushings that go into the pedal assembly itself

Those ones from year one are the small ones, the fit the inside of the metal tube perfectly but I still need the larger ones for the outside of the tube

are those the little ones that go on the inside of the metal tube that the clutch pedal slides into to or are they the large ones for the metal tube that slides into the entire pedal assembly?

mine came with that piece too, but it wasn't bolted on it was just packaged with it

I called brewers, they have the small inside ones but i need the outside ones. They only carry the ones for the HD version of the pedals. They didn't have a clue where to buy them and actually asked me to let them know if i found them. I will try to look in the catalog, but my local dealer...

Yes those!!!!I will have to call and talk to them. I called brewers and they didn't have any idea where to get them. They carry the small ones for the inside and the large ones for the heavy duty pedal set but not the standard sized ones. Thanks for the help I about gave up finding them...

on second look and after talking to them, brewers doesn't even have them. They carry the inside bushing and the ones for the the outside but only the HD pedal they have no idea to get the ones for the regular pedal

anybody know where I can get the bushings for the clutch pedal assembly? I rebuilt my pedal setup and need to replace the two outer bushings. Brewers has them for $3.50 a piece but figured there might be an alternative place or some other part that works thanks

I'm pretty sure you don't cut the cross member, i think the shift rods go over top of it. I don't have a 4sp yet, so i'm just going off of everything i have read