Search results for query: *

  1. mean green

    R.A.H. any Turbo's

    What is a R.A.H ??
  2. mean green

    new car on the jig

    Ahhh I remember when my car looked like that . You can make this bar removable now in SFI rules 25.1E and 25.2 and pull your transmission from the bottom .
  3. mean green

    Alternator with mid plate, vac pump & belt drive fuel pump

    Alternator mounted on the mid plate really got my attention so I had to look . You have the alternator mounted on the "engine plate ". The "mid plate" is the plate that is in between the engine and the trans . Good work by the way on mounting job ,,,,, The grammar police has left the thread
  4. mean green

    10 sec Cuda

    The good old days , and I thought parts were expensive back then !!
  5. mean green

    A-body fiberglass dashes this is it, no more!

    Whats the weight of the dash , I am interested
  6. mean green

    Can it hook?

    I still have the 8.75 in my coronet , they are fairly strong when you back brace and put the mark Williams main caps on the center section , the bad is the pro gear availability . I went a best of 9.75 @ 138 at 3800 with the 8.75 and the housing was slowly getting tweaked after time . I would...
  7. mean green

    Wheelie Bars

    First post deleted and videos taken down ?? You say that you have it figured out .What have you figured out ??
  8. mean green

    Wheelie Bars

    I agree with guitar jones on all points , the car has to be lowered and if you have to put a wheel that fits in the wheel tub then so be it . The stored energy in your front suspension is not helping you either , put a shock with some rebound damping on it and slow the pitch rotation . If you...
  9. mean green

    big Block Oil Mod???

    Its a 540 with twin 88mm turbos , I just went 6.83 @209 today at the Rocky Mountian Shootout in Edmonton . I have to turn it up tommorow to make it past first round .
  10. mean green

    big Block Oil Mod???

    Block was not drilled for lifter oiling and no machine shops in town could drill a oil passage two feet into the block . To send it back to KB it would be a $700 round trip along with the $250 KB charges to drill the oil pasage . I did this for about $150 .
  11. mean green

    big Block Oil Mod???

    When I had the B1 heads I ran a .040 jet on each side. .
  12. mean green

    big Block Oil Mod???

    I run a .065 jet and it supplies everything up top
  13. mean green

    big Block Oil Mod???

    You will have to run a jet in the feed line if you want to do it . You can't just plumb in the line to the rocker shaft and let her buck ,, the valve train will perform like a sprinkler system .
  14. mean green

    post your 9second and quicker combo's here!

    I am sure you can get a 9 second slip with 3 spark plugs not connected ;)
  15. mean green

    post your 9second and quicker combo's here!

    Predator heads , pro-mod 88 turbos , bigstuff 3 fuel injection ,
  16. mean green

    Drag Week Unlimited Duster

    Where is the fast forward button on this thread , I want to see this thing make a pass.
Back
Top