Search results for query: *

must have been to much clear in the paint ...

Pics of the torsion bar Alterkation. This baby bolted together like butter .... smooth ... now I have to get the front tires mounted to the rims and mock up the motor and trans .....

finally got the meats under the car .... working on the alterkation this week then on to the roll bar ....

they are US cartool ... I bought them on E-bay ...

the weather is the same here although not quite as rainy ... here is what I am going to order and try ... they also make a difuser that put the heat to defroster ducts but I will be making my own out of sheet metal so I can use the factory control to choose heat and defrost. My design will also...

I am going to use an after market heater than mounts completly under the dash ... BB darts and heater motors are a PIA

I only had to finish the blasting and I used about 200 lbs of abrasive I would say to do a whole car you'll need about 800 lbs. No torque boxes ... the front mounts are inline with the frame connectors now and I do not need them, I have given thought to adding plating from the new spring...

I will be using a universal fuse block and making my own harness up when the time comes. I'll be writing some stuff up and taking lots of pictures for that part of the resto

More progress ... the springs have been moved in . I also welded in the cross member for the RMS street lynx rear suspension. I filled all the extra holes in the fire wall and welded the brackets in for the console here are some more pics !!!

I forgot to post the updates here for my car so here goes. Progress was a little slow, but there have been lots of other goodies showing up .... new roll bar,,new dana 60,and my honey bought me a 440 source stroker kit for my birthday, so I took the money I had slated for it and bought a new...

very nice ... post up some more pics ...

You might want to check out the local rental place for a hot water pressure washer. The hot water makes a world of difference when cleaning grease and gunk ... should rent for a bout 10- 20 % more for a day but believe me it will make a huge difference ...

Thanks for all of the compliments guys !!! The car will be Black when done. And yea I have a good compressor but even with a 7.5 hp 80 gallon 2 stage compressor I could only maintain 80 psi while blasting, but like you I got the job done ... can't wait to finish the mini tub and 4 link so I...

Also got the frame connectors done yesterday some more pics

I got one of the wheel tubs done today ... the cutting out part was cake .. the lineing up and making the filler strip took some time though ... plenty of room for the 305/45/R18 drag radials ... the rims are chorme but the always look gold in the photos ..

Well after the car sat for about 4 weeks at the media blater with little being done, I decidedto go and pick it up. Theshop had the top and inside blasted. The bottom was not done. So Iswung by the local blasting supply place and found out that they no longer sell sand for blasting, so I...

Thanks for all the compliments guys ... the original color is actually tan ... then some one painted it a bright gold and then some one else painted it the light gold you see here ... I will be painting it black. I am going to get a set of 68 trim for the windshield, not for the reason...

I picked up a nice 67 dart. I am doing a full rebuild of the car and have gotten started on this past week. The car turned out to be completly rust free and in overall very good shape. here it is when I pulled it into the shop before i got very far I found some...

No the mig welding will be just fine ...

that is one good looking valiant

Looking good ... didn't realize you had so many more pics posted over here ...