Search results for query: *

01heavy - motor is pretty much stock..Intake, now an EFI, headers, crane cam 554 lift 255 duration and now obsolete nitrous system *(for now anyway). 9to1 compression running 93 octane. Rumble fish - it only asks for *camshaft type with 3 options to choose from (stock, medium or large) I...

Rumblefish...thanks!! Cost is about $2000 and needs to know 1) engine displacement 2) # of cylinders 3)return line or not 4) idle RPM target 5) rev limiter 6) timing control on or disabled and 7) camshaft type (stock, medium or large) They released it in January/ feb and its in most magazines...

Thanks!! Wasn't bad but you have to run a new Fuel line and we had to make a new bracket for the fuel pump (My fuel pumps are tucked away behind my fuel tank/cell) so it took a little more time..Plus I wanted to keep the engine area clean so we hid the computer inside the car behind the...

Just had a buddy help me install the new MSD EFI system on my 69 Dart..After we put it in, It took about 5 minutes for the idle to level out after the initial start up. I have been trying to drive it to let it learn and so far so good! Fairly easy install and about 5 simple questions to imput...

I cant wait to put it together and drop it in the Dart in place of my current 383.......Here's what I got: A unassembled 11:1 comp 440, .030" over with torque plates, ARP main stud kit, forged crank, polished/re-sized LY rods with new Wiseco flat top forged pistons, decked block for a .005"...

1970 Duster...Thanks for the reply but not running a PVC Valve...Although I did take it to a buddy's shop today and put it up on a lift..We ran a camera up the back of the motor and found that BOTH Oil Galley plugs are backing out...Almost 1 turn each and they will fall out...I will pull the...

I have a freshly rebuilt 383 in my dart. I replaced the rear main correctly but have a leak especially when rpms are up. I pulled the oil pan and replaced the main again and let it cure over the weekend. Started it today and let it idle for about 10 minutes at about 160 degrees.. No leaks...I...

Any suggestions on a oil pan that will fit close to even or above the K Member of my 69 Dart. I am currently running a Milodon Street strip 7/8 quart pan, that hangs so low, it is the first point of impact on anything that comes close. It is a Pro Street Car that sits low and I am trying to...