Search results for query: *

Denny, as always thanks for a thorough explanation.

Denny, your brother mentioned they're primarily for drag racing applications. What's their street limitations? BTW will be ordering my HDK for my Gary Stanton 572 Hemi project after the 1st of the year. In the midst of 82,000 sf shop project... thanks, Ralph

An old thread that needed to be resurrected. I'm going to break out the MP Performance manual and re-educate myself... thanks Rusty.

HemiDenny K-Member was my choice, PM me for details if you'd like...

Not sure, picked it up with a sling bridle I have from our local Caterpillar marine dealer with their forklift and unloaded with my lift. The legs telescope also and the base turns similar to a turret.

1974 Dart Sport 360, yes sir... Some pics before glass bead blasting, epoxy priming and first tack coat of low gloss Imron. Painting will be finished this evening, then reassembly.

Would it make sense to see if a leaf spring manufacturer like Espo could relocate the centering pins on the leaf spring assembly further back to better center the rear in the wheel well area? Adding spacers to the front, altering pinion angle and changing and or relocating stock type shackles...

Pulled all the hardware off. Need to glass bead profile the new HemiDenny parts. Will be epoxy coating all steel with DuPont 545 epoxy primer today followed with DuPont industrial satin black Imron.

Couldn't pass up the deal - bought it to pull the Detroits in my 33' Blackfin Combi this winter. If bigger is better, it's the very best! An OTC electric over hydraulic, has a manually telescoping boom rated for a mere 6000 lbs. Overkill, just a little bit...

Here's a few more pics... and headers are Doug's 776-D453 metallic ceramic coated 1-5/8" tubes

Take it from the 8-3/4 forward, kind of: Cass at DoctorDiff (all new) nodular 489 with Eaton TrueTrac and 3.91, 1350 forged yoke, 30 spline 5 x 4.5" loaded axles with 2" studs. Cass will be providing me with a new 1350 driveshaft once I get him the length. Rear drums ditched for disc conversion...

Denny, received mine today. Fantastic job!