Search results for query: *

naw, someone bought all that stuff

The DMT kits do come with instructions that have pictures showing all the major components of the box. The picture quality isn’t perfect, but it was good enough for me to walk me through restoring my own heater box. Your other option is a service manual for you car, between the two you should be...

is there a pic/guide as to where the gaskets all go? I'm assembling a car that I didn't disassemble.

This might be old hat for most of you but here it is anyway. As part of my ongoing rebuild efforts I took the heater/evap box off and look at all these leaves! I figure most of us have the same problem. Taking the box out is a bunch of work, but there is no reason you have to because with two...

"73 Dart. I have to pull lots of things off because of a problem laundry list -wiper bushings, heater core, speedo cable, vacuum hoses. is there anything else I should do while I have the dash all apart? was considering pulling the evaporator core and replacing it with something more appropriate...

I built my own. It's for sale now as I'm throwing the slant away.

Used Evans a couple times, you have to get used to to the temp gauge reading high. Since Evans won't boil, it can get away with higher engine temps, your motor may even run better at higher temps. water based systems are pressurized and have the srange they do based entirely on the boiling point...

well It turned out I was wrong. once installed the fan hit the pump. talked to Griffin and the correct part number was 70020- right width, two fans. upper rad inlet needs to be changed so its a technical custom order. Slant Sixes, Sigh.

those stupid cables- mine spent a week in a rust remover bath, another neutralizing that and then dry silicone lube the whole thing. Smooth as glass now..

Well,I bought the Griffin one that was a supposed "exact fit" for my '73 dart L6. it is 17 not 22 inches, bolted up right. the outlets were within 2 inches of where they were supposed to be and the trans cooler lines only had to move about 6 inches. I had an electric fan offset before to clear...