Search results for query: *

So...I was wrong. I just checked the car,185/75-15 mh racemaster radials on streetlite 4". Mounted is 25-3/4" and 26" with no load at 32psi scaled at 1460# front

mathematically 25.2", I can measure the installed height later this afternoon when I get home

I thought they were 5" . I bought them in 2015 . Yes tilt/removable VFN nose. Thanks

I didn't weigh them but they are lighter than I expected. 6000 street miles and approx. 40 passes, still run true.

15x10 w325/50-15, 15x5 185/70-15

I run 325/50×15 M/T Street R's, drive and drag them with no issues. I was originally using the same size M&H racemaster radials and had nowhere near the traction.

Rob, I'm with professor fate on this one, I had those on my 65 coronet 500 when I was stationed in NM. Bought them at a junk yard off a Javelin. They don't like the skinny OE mopar lugnuts or the seat angles it seemed.

I run my 325 ss/r's 16 track 30 street no problems at all

A-body, Nice car , and thinking about it and I'm positive weight and weight transfer are factors. I also have a Tube K (HDK) but front halved and light at 2960# with 1500 even on the nose. So I probably shouldn't have commented. Tire choice is going to be relative to feel and expectations.

AGREED, With the original factory brake bias and some HP it is scary at times (turns and panic stops).Even with all Wilwood and an adjustable valve I had to pull some front brake out and send it rear, you find out quickly that there isn't enough rubber contact up front and to much mass at the...

back in the day I would use an SOS pad, the soaps already in it

same wheels here, loving the looks. they seem to compliment mopar body lines well. btw if you change your mind about the rear discs I have a new complete wilwood kit with p-brake and 12.19" rotors #140-7144 that didn't fit inside the 15x10's. Wilwoods sizing chart is for steel wheels.

2" narrowed with wildwood disc/mock up 15x10 with 4.5 bs/325-50-15 mh racemasters/control freak triangulated 4 bar/at set ride height .The rear rims are gonna' be replaced to match the fronts, but my measurements show I can go with 5.5 bs, so I might experiment with 15x12 with 390's