Search results for query: *

I agree with everyone else here just measure it to make sure it's an abody.Any "pig" will fit it so put it in,drive it and look around for a complete center section.It wouldn't last five minutes around here for that price.

I built what you have there only differences,750 carb,4.10 gears,3500 lbs car and 2500 stall.Not enough stall FOR ME.In my opinion a 3000 would have been a much better match.If your cam is the mopar P4120231 shaft it's a [email protected](not small for a street car) and rated at 2600-6000 so why use...

MP purple shaft .484 lift cam=3000(IMO no less)

throw the cam away.I have one and it NEVER worked good until I put it in a pull truck with 10.7 compression,1.6 rockers,4.10 gears and a 4000 stall.to me they have no bottom end.the cam Bad Sport has would be a better match.but if you are going to keep it, don't run anything less than a real...

When I'm working on a vibration like that, I'll jack the truck up,put it on stands and try it.I'll have a friend run it at the speed it vibrates and I'll watch it.Remove tires and drums if need be,what ever it takes to narrow it down.Even rotate the drive shaft 180 and try it on the stands.All...