Search results for query: *

  1. 69wacuda

    Twin turbo: 318 or 360, and why? This are your only options. GO!

    Daily (3 season) driver/WEEKEND WARRIOR! . Quick spooling, Mild/moderate boost (8-12psi) Reliability, not looking for peak power output; yet, but maybe a dedicated racer in the future. Just laying the ground work. Honestly just need a strong base engine that can handle the boost. Currently...
  2. 69wacuda

    Twin turbo: 318 or 360, and why? This are your only options. GO!

    Excuse my ignorance, what's a "6-71"?
  3. 69wacuda

    Twin turbo: 318 or 360, and why? This are your only options. GO!

    The base motor is the only stricture. How you build it is up to you
  4. 69wacuda

    Twin turbo: 318 or 360, and why? This are your only options. GO!

    Your choice to turbo arrangement
  5. 69wacuda

    Twin turbo: 318 or 360, and why? This are your only options. GO!

    Build them how you want, stroker, screamer, let us know.
  6. 69wacuda

    340 x-block vs. 410 stroker ?

    Very eloquently put there Sir. Bravo.:thumbsup:
  7. 69wacuda

    360 Cylinder P.S.I.

    i should also note that when i noticed it running roughly, i removed the spark plug wire from the number 1 cylinder (while it was running) there was no noticeable change to how it was running at idle. the spark plug looked like it was good and seemingly only failed to fire at low rpm or idle...
  8. 69wacuda

    360 Cylinder P.S.I.

    so i tested all of the cylinders with a little bit of oil in them, and 7 of them are with in a range from 83-90 psi. and one ( 2nd from the front, passenger side) is at 100. the car was running really well up until a week ago. what does this mean for me?
  9. 69wacuda

    360 Cylinder P.S.I.

    the test was done cold with all the plugs out. The car had been sitting for over 24hrs when I did the test. Also the car has been driving and running great for the last 6 months, up until a week ago. it started to idle exceptionally rough and at cruising speed would have an intermittent...
  10. 69wacuda

    360 Cylinder P.S.I.

    What should my cylinder compression (psi) be on my 360? I was told that the engine doesn't have very many miles but I have check three of the cylinders and they read 83, 75, 78 p.s.i. so far. I thought compression should be in the low 100s? Thanks.
Back
Top