Search results for query: *

Lol. Yes it is vented to atmosphere. It’s driving me crazy Also took fuel door off. Just in case the tank vent is plugged. But same.

It’s a brand new mopar electronic ignition. Literally brand new distributor new cap new rotor. Brand new orange box. Brand new carb. It fired right up after doing ignition.

Right off the back of alternator

Yes and no. I ran it with and without just the ballast. I have an internal coil. And same thing

So I know it’s not an abody. But this is my go too lol. Taking the lean burn off of my 86 fit have. I’ve put on a brand new 2bbl none electric control ditched the distributor and put in a Chrysler electronic ignition and vacuum adv distributor. It fired right up. Ran for 20-30 seconds like...

My bb dart is set at 36 total. Retards to 30 when the nitrous hits. It’s msd 6al2. Lol. Locked out. Much different than my stock truck

If I had to guess. Around 10-15. Lol. Just kinda bumped it with my ear because the smog air pump crap is still in the way. Can’t get a good reading. I’ve since got it out of the way. But have not done it yet. Going to set a total timing of 34 ish and see how it likes it.

Fixed. Can only assume combination of things. Main thing being the idle and the transfer slots. I disassembled the choke because it wasn’t doing anything. Like it was locked in place. Not allowing me to adjust the idle screw anymore. Took choke apart. Put it back together without connecting...

It does. Lol. Pretty close.

How do I adjust this. The throttle screw is as far as it goes. Choke is disconnected?

That’s Holley. “Out of the box” lol

This is the off the shelf Holley. No adjustments

I don’t usually either. Did when I was younger. Last 2 times I changed them I just put silicone. Figured. I’ll just throw it in.

Took a quick handful

Will do. Give me a few minutes

Exactly. It’s acting like it’s got a giant vacuum leak . Lol. But I mean. I’ve swapped sbm intakes countless times in 20 years. There’s not a lot to it. I’ve plugged everything off. I’ve replaced gaskets 3 times. Lol. Ram like a top with 2bbl. As soon as I put the 4bbl. Garbage lol

No. Not that I can remember.

Yes. About 3 months ago I put a new oe mechanical pump. But had no issues with the oe 2bbl set up

So just as I was thinking. Bumping up the timing is going to up the idle. The idle screw is backed all the way out. It’s still to high. Even with the throttle disconnected. Idle is high. And there is no more adjustment for me on the idle screw. lol. . Thank you guys so far. Even...

Never took them off

It is stock because it just did smog back in sept. (I’m in ca). It’s now a 1974. Shhhhhh. Lol. But it’s so rich I don’t think timing is the issue. But will for sure advance it. Been wanting to anyway

That’s why I said the two Holley and my 750dp

There is no fuel dumping or dripping in as I can see looking in the top while running . It’s rich because there’s black smoke and it’s burning my eyes lol. Loading up real bad. I don’t think it’s a power valve issue as it’s literally had two brand new out of the box Holley on it and my old DP...

I know it’s a truck.. but..... I took the 2bb off of my 360 and put a low deck weiand single plane on it with a brand new Holley 600. Runs super rich. There’s no vacuum leaks? I’ve changed the intake gaskets 3 times. No leaks . I’ve put on 2 different brand new Holley 600 vs. also...

Idle video and a little rev video of them in the truck

Sorry. I live in California. Turns out the truck is from out of state. So taking care of that first. Should have them on by the weekend.

lol I’ve had these on my bb dart also. But looking at the black widow design. I can attest to there being no drone. I currently have black widows in my race car. No drone. Flowmasters always have that drone. Just experimenting. Why not

So. I haven’t found anyone who has tried this only. I’ve always wanted too. Since I put black widows mufflers on my bb I’ve loved them. Had them on a v8 Audi also. No drone. So. Being the hillbilly I am. I drill a 2” hole through some eBay single chambers. Basically flowmaster super10s...

Not slammed. Just a bit lower. I think they look better. It’s 2wd. I have some nice staggered 18” coys wheels I’m going to throw on it. 18x10 18x8. ‍♂️