Search results for query: *

If mostly street driven go with the 50mm,i have heard if the gate is to small it can give you problems at an idle with building boost.

Took the wheels off the dart and put them on my 69 superbee. They fit good,but the front tire needs to be taller or run 18's in the front.

I believe i only have 4.5" of back spacing. Makes a big difference to get it to fit. Thanks for the help

Now i found out they don't make a 5/64 hellfire ring:banghead:

After looking at the front wheels last night,the photo shown the top are in about 3/4 of an inch on the top. My other concern is that the front tires outside to outside is 69 inches wide. The rear is only 63 inches wide,i don't have the disc brake rotors in but that will only be a 1/4 difference...

Will this work,i'm not completely happy with the fit in the front wheel. Any opinions? they do not make a Boss 338 rim like this with more back spacing.:protest: The second to the last picture is the front tire turned in to the front fender,unsure of the trimming needed:banghead: I don't...

The engine right now is, The block is machined and is .030 over Pistons will be speed pro forged L 2386F-30 Thinking of hellfire rings Stock rods with arp bolts(done) Crank is undecided,they don't make a stock forged crank and the after market is beyond my budget at this time. Camshaft...

This was a six cylinder car to start with and it had air shocks too.I'm pretty sure the rear springs are junk,i planned on installing an add a leaf to the rear to help out a little. I planned on trimming the front on the top along with the front of the fender lip to clear the tire when it...

yes boss 338,yes it is mini tubbed. It took me a while to find the wheel combo,i like the rear but the back spacing is a little off in the front.i would like them in about another inch and a half but they don't have that offset. still need to trim the front fender edge about an inch and also...

My five year old daughter called it ugly from the day it was dropped off in the driveway. I will prove her wrong,it just take a little time. Thanks for the kind words guys

Here are a few pictures of my on going project 360 79 power wagon engle cam Intake 480 ex 468 114 lsa in dur 274 ex dur 268 gt45 ebay turbo reversed shorty headers from a 99 durango 2.5 hot side with a 4" down pipe splits to two 3" for duel exhaust 50 mm bov 50 mm wastegate a500 overdrive 8 3/4...

Many different sizes of the gt45,1.06ar 77ish on the turbine is what i have. Still in the building mode so i don't know the outcome at this point.

Just finished cleaning all the metal shavings and flashing from the housing,and there is a lot of it. Thanks for your input Mad dart,can,t wait to see up and running.:burnout:

Thanks for the quick reply,but is your idea the same with the 360?I like the idea of have a wastegate if something goes wrong. After looking at the price of wastegates your idea was sounding good,but the plan is to run a built engine later down the road.

It will never hit a track,so running no wastegate will work?I assume i will still have to run blow off valve. Isn't the wastegate a good idea for the street.You don't think it will spool on the street with a wastegate? Thanks for the replys guys,keep it comming.

Picked up a new gt45 of craigslist last night,new never used for 200.00.After looking at chevy 350's running them i should be close to my goal,for the money i will take this way for now with a single setup and do some learning as i go. I thought about dropping in a 360 magnum for a little...

Thamks for the info Mad dart,i'm thinking on the mp t-76 because a guy has one on craigslist new never installed,what d you think?

After talking with a few people,maybe the single is the way to go,thanks.Any input on the mp t-76 q trim with 1.00a/r.found one for 650 new,i'm thinking its a little big.

Thanks for your reply cuudak,this will be a street car only thats why i was looking to go with smaller twins.I have not looked into the mp70,but will have a look.Thanks for some direction.I understand that blow through is not the best for the street,but is more budget friendly at this time.Ilike...

Not needing a cam right now,but thanks for the offer.I don't think you will have a problem selling it.:)

I have seen what Mad dart is doing(thanks),and i have just finished mini tub and a spring relocation and an 8 point roll bar to fit on a 70 swinger.Doing mock up on a 360 with a a500 and an 8 3/4.Now for the questions,after reading Mad darts progress i'm thinking turbos.I have been looking for a...