Search results for query: *

Just a quick post to all I am rebuilding a 74 K-frame and chassis for my 72 demon. I will post pictures at a later date. I am thinking of building complete and placing the engine and trans on, then doing the install from the bottom up. Ive done this before so many years ago; I hope I remember...

I found a machine shop to do it for low bucks. They welded in a steal plug and then pressed it out. Big time saver. nice work. Apex Bensenville, IL. Several others refused the work before I found this one. They also did Two sets of 340 x heads and a 416 stroker motor for me. Such nice work.

All is well! I managed to straighten out the frame rails on my Demon. I used two custom made steel I-Beems and a come-along with a big hammer. K-frame bolts in now and rails now look straight. This was not the first time I had to modify a-body frames. I now wonder how much horse power these cars...

yes

Chicago. MR Norm's area.

This is the best post yet. Cool diagram. I have two custom steel I-beems that bolt to the bumper brackets. These are very strong! have several locations to hook on to and bolt to. So all I think I need is a really good come-along. All I need is that 1/16. other wise I'll bolt up front two put it...

Way to far. But thanks.

After careful consideration I agree. I will try to squeeze the frame rails the 1/16 I need. I have a few more tricks up my sleeves.

I think I need to squeeze them 1/16 or so. should do it. So close and yet so far.

I need to squeeze the rails if that is the case. I was able to straighten the front frame rails where the K-frame bolts up using a steel I-beem (custom made)and the original bolt. so front frame rails now look good and k-frame bolts in front holes no problem. Just the back two holes are about...

Hello: I am replacing the damaged k-frame on my 72 Demon. I replaced the original more than 10 years ago and all was well. I like the horn type mounts. So I manged to bend the k-frame on a high curb at speed, and I bent it badly. (more that that one later) Any way the replacement I have is a...

It looks like you will be needing some outer wheelhouses. good luck finding them. Also I can only guess but is this B-Cuda or other A-body. No trunk extensions are avialble for the A-body cuda. So you have to use duster ones and modifiy them. (not easy but can be done) Also jims auto has a one...

Cool now I know the size of the bushings 13/16. I think I can find some now. But what I forgot to ask is what size are the center links also. I mean how long are they? Any one know this one. Please advise Thank you

Hey does any body know where I can get a set of bushings for a 74 Duster? I don't know what size the sway bar is. One problem is I need the bushing with the clamp around it. (lost one) I don't care if their are after market. (graphite would be better) I also need a link kit. I called PST and the...