Search results for query: *

Gold? With a spring location kit already installed and parts painted Hemi orange? Ad says there is some rust under the heater box but the rest is solid. Not saying it is accurate, just what the ad says. I didn’t even think to look at the ad deeper to see if it fit your criteria. Sorry about...

It’s a long drive but one popped up in Spokane, WA today. I tried to link it but it wouldn’t post. It’s in the AbodiesOnly group. Project car for $4k.

1974 Plymouth Duster Doesn’t say fold down rear seat option, but looks like it has it based on the trunk picture?

Anyone have a Charger/Challenger/300 spindle they don't want much money for? I'd prefer something that is bent or broken since I can't ever use it and don't want to spend real money for it. Needs to be one with the bolt on wheel bearing hub assembly so 2012+ SXT/RT or 2015+ SRT (I think)...

I forgot the OP was looking for a clean car. It popped up on my marketplace feed and I posted the link without thinking about how it fit the original parameters beyond the sunroof and fold down seat.

??? 1974 Plymouth Duster

Looks like you have a hole in your box. Maybe it fell out? :lol:

I didn't find a place I could source the knob, so I just cut the plate to kind of match it and left it at that. Not really sure on the spring either. I know mine came off a pickup bench seat (same one I got the latch I started my pattern from) so I would guess the spring would be easy enough...

I just checked and I can get up to 14 of them cut for the minimum order of $29, minus tax and shipping. If you wanted a pair, and didn't want to pay $30 +/- for 2 of them, I could get some cut and put the rest on the shelf and send you 2. So maybe $15 shipped for a pair? They would just be...

Never did make any more of them. Can't remember if I have any either but I can look around. And I don't work anyplace I could get them made like I did last time. The best option is probably to send you the file and you could use SendCutSend and get some made. Pretty sure they have a minimum...

Don't overlook these. I run those exact seats in my Duster, just have to build or buy the latch and spring to make them fold. There is a lock under the cover that keeps them from folding, very easy to remove...

I'm not saying it won't work, only that in my case it didn't. I talked to Brewer's about it because I bought the same one you are looking for from them and then pulled the one in my car out and found it was the same as what I had bought. I ended up using the one Brewer's lists for a truck in...

I’ve got one. But only because I just pulled it out due to it putting the end of my fork too low and requiring a large dent in my head pipe to get it to (sort of) clear.

Here was the original sales thread: [SOLD] - MP M1 Dual Plane Intake $300

I also have an M1 I ran on my motor for a couple of years. Sold it once and the guy complained that the ports were cast low and didn’t align, so I have it again. Appears they are about and 1/8” low when compared to the cylinder heads. Haven’t gotten around to re-listing it, but will at some...

Still have a set? Will PM you.

There used to be a TQ Guide floating around on the net written by Gary Lewallen (aka. Vaanth). That guide lists the rods for a 6319 carb as 1966, further supporting the earlier post. The primary jet should be a 4098 and the secondary a 5137, FWIW. I used to collect TQ's and have several in...

Thanks! He has a set headed his way and wants to wait until he gets them before doing anything else.

Here's a picture of some numbers off the back of a set of covers for a Duster/Demon/Dart Sport. Not sure the numbers didn't change over time, but it's something to start with.

He doesn't have anything to get numbers from. They should look like this:

Not a clue. Far as I know he doesn't have anything right now but I will ask if he does and can get numbers if I can. Not sure it needs to come to that though. I think they are the only one's with a curve at the top of the windshield.

My brother is looking for the A pillar trim for his '71 Demon project. Anyone got something in good shape to sell? Thanks.

I have the one I sold a month ago again, it was returned due to the possibility that the ports are low and don't align with the cylinder head ports. I am currently putting a 5.9 together so I can test the alignment myself and then plan to list it again. It's the one I posted a picture of above.

I have a disassembled one, aluminum case and all. Only parts missing are the syncro's, mainshaft and tailhousing. Well, technically the mainshaft is here but I bought the trans due to the tailhousing having exploded so I assume the mainshaft is bent. But never checked it either.

I think it depends on what you are planning to run. Went back to some of those threads and it appears the linked manifold above would work if you don't plan to run AC? For certain an Edelbrock Air Gap Magunm 7577 would work in all cases. You can look for an MP M1 intake with the right setup...

Don't think that one will work with the serpentine belt setup. He needs the one with the straight bypass fitting. I could be wrong, just what I understood. Edit - not saying the defining factor in the belt setup working is the bypass hose fitting, only a way to identify an intake that would...

Funny! I kind of wondered.

There was another thread on here a little while ago where a guy was looking for one, even said he had a line on one the guy was supposed to sell him if he ever got rid of it. But I can't find the thread now. But I did find a post where a guy said Scott Smith at Harms Auto was selling them and...

Pretty sure you can get aftermarket brake kits that have dual pattern rotors. Pretty sure Roadkill Garage did that on the Vanishing Paint Challenger as Freiburger had Chevy pattern wheels he wanted to use off the Crusher Camaro. You could see if Willwood or some one has an off the shelf rotor...

Be careful with the '73 engine harness on a '74. In '74 they added the seatbelt interlock and the start circuit is pretty different. If the OP is savvy enough, should be able to make it work if something doesn't connect right. Pointing it out just in case. EDIT - I was curious so I compared...