Search results for query: *

In my 1968 Barracuda fastback, I run a 400 based 512 stroker with Trick Flow 240 heads and a hydraulic roller cam with 254 duration @.050 with 618 lift, backed by an A833 4speed manual. Intake wise, I have run a port matched TM6 single plane with a 1 inch spacer and also a RPM, topped by a 950...

I have a 1968 Barracuda fastback powered by a 400 based 512 stroker, backed by a 4 speed. I run Schumacher headers with modified 3 inch collectors that go into 3 inch exhaust with an H pipe and 3 inch Magnaflow mufflers with an 18 inch case. I have manual disk brakes with power steering. The fit...

Right on. My duration is similar to yours, but I'm running 1.6 rockers and better flowing heads. I'll see how the Schumacher's are. If I feel they're choking the mill up too much, I'll look into bigger headers. Thanks, man.

I have a 400 based 512 with Trick Flow heads, a hydraulic roller cam with 254 duration @.050 with 618 lift and a port matched Edelbrock TM6 intake. I plan on running the Schumacher headers with modified 3 inch collectors in my '68 Barracuda fastback. What cam and heads are you running? Thanks...

Hi there, How have you found the Schumacher headers on your 470? Have you ran it at the track at all? Any regrets regarding the headers? Thanks, Glen

Another low profile power maker is the Edelbrock TM7 (RB) and TM6 (B). I run a port matched TM6 on Trick Flow heads on my 400 based 512 stroker in my '68 Barracuda fastback! Hell yeah!!! Glen

That is way up there. I will stick with my TM6 for now then. Check out my Barracuda in my garage. Thanks again, Glen

Famous Bob, Thanks. That's good to know. Glen

Andy, Sounds good. That's something I may experiment with in the future. I bought your book and found it very helpful regarding my 512 build (see my garage if you have time). Thanks, Glen

Andy, On my Trick Flow 240 headed 400 based 512, I am running a port/ gasket matched TM6 intake. I am running a hydraulic roller cam with 246/254 duration @ .050" and 618 lift. I will chassis dyno my '68 Barracuda once my clutch and motor are broken in. Two questions: Will a low deck Track Heat...

Right on man. I hope you find a set of schumacher headers for your ride. Good luck bud. Glen

I just ordered and received a set of motor mounts, torque strap and some other parts from Schumacher. They are indeed still in business. Maybe try calling them. Michael Schumacher was quite helpful. Glen

Naw, they are easy to find used or brand new from Schumacher. They are a very slight performance compromise (2 tenths of a second in the 1/4 mile), but are way better in a street car fit and maintenance wise. I found a great conditioned used set for under $400.00 Canadian. Like anything, you...

Andy, I love your articles. I bought your book before starting my 512 build. Great book by the way! Check out my build for the 512 in my Barracuda in my garage. Thanks, Glen

Bruce, Check out my Barracuda in my garage. I'm sure you will enjoy it! Glen

Womanator, I know this is an old post, but I want to thank you for your posts on the Schumachers! Your posts help influence my decision to go with the schumachers in my Cuda.b Glen

68Dodge, I enjoy your posts regarding the Schumacher headers. Such helped influence my choice to use them on my Cuda! Glen