Search results for query: *

ok, my .02 time.... Just read your post and a couple of things come to mind. 1) Fuel sock in your tank is getting clogged. 2) Small air leak in the feed line to either pump. (could be inside tank) Only 2 things that make any sense from what I have read. The fuel press dropping to 4.5...

I have a boat with an 80 gallon tank. I've never ever had it full and I've owned it 10 years. ONCE, I didnt start it for 9 months. Well.... That led to 2 new Fuel Pumps and a $900 Bill !!! (The Fuel Varnished the Pumps). Now, I only put in what I can use within 6 months and I use Either...

I have one on my 360. can't tell ya for sure, but it's close to stock height

IMO ,There's no reason to worry about Smoking in the car if the "Cell" is Installed Properly. You'll notice a few things going on in "My Install". The spare tire well was cutout and replaced by .035 sheet metal. Welded in Braces are under the sheet metal. The Tube on the upper left is my...

Adam... For the amount of trouble/hassle and expense you'll have dealing with the stainless.... IMO I'd go with the Aluminum or even better IMO Braided Line. I wish, I would have used it myself :cussing: The solid aluminum line I ran transmits noise like crazy from my electric pump...

I have the same Carb, Jack.. I'm by no means a carb expert, But a little birdie told me to tell you look electrical ... Bucking just dosent sound like a carb problem. Don't forget most problems only show "under load" . Keep us posted... Hopefully Mrmopartech can help :salute:

Thanks guys, I was pretty sure it was a float or needle/seat issue. I figured I'd ask before tearing into it, since it's a new carb, fuel lines,pump, Fuel cell. Must have some debris caught in the needle seat area. I'll try a light tap with a hammer 1st. Then take it apart n see what lurks inside.

Hey all. I have a holley 3310 (750 vac secs) brand new out of the box on my 360. Today, while running the car it wouldnt idle and I noticed that fuel was dribbling down from the secondaries. What could cause this? Do I have a stuck/misadjusted float on the secondary side? Running 6.5-7 lbs fuel...

Adam, Save the $$$ and get a roll of 1/2" aluminum line and a roll of 3/8" (If you want a return) Took me an afternoon to do it on the Duster. Total cost approx $100 without the pump n regulator.