Search results for query: *

I have used FireCore, MSd, Moroso, Taylor, Magnacore Blue Streak (same product line as the link) and Accel with good good results. The most I ever made on n20 using Blue Streak was 576whp. I think you will be fine with the more economical of the two.

This particular dist has a black wire with orange tracer and a black wire with purple tracer. MSD is sloppy in that respect.

This particular dist has a black wire with orange tracer and a black wire with purple tracer. MSD is sloppy in that respect.

The green wire is mag negative on the box and it has a detent on that side of the connector housing. The negative hookup on your dist will be the black wire. Pic from my GTS.

Usually the mag pickup has a violet wire and a green wire. Just make sure you preserve the mag + and mag - . I assume the mag - on your distributor is the wire with a black tracer.

My advice is to break out a test light and check for voltage where it shouldn't be. If you have a multimeter with a continuity tester (the setting that beeps when you touch the probes together) you can disconnect the battery and start removing power wires until you find one that is shorted to...

Find a 16ga chunk of aluminum and bend it in a "U" shape. Transfer punch tach mounting pattern and drill. Clean up tooling marks, paint your color of choice, use button head allen fasteners to mount tach. You can use some adhesive backed foam under the bracket or felt to protect the dash pad.

Pertronix with an epoxy filled coil. If you need a rev limiter use the external rev limiter box.

A good guy to ask would be Cab Burge on Moparts.com He is well versed in this era of aftermarket ignition boxes from the early days.

My car is a 4 speed therefore I lock out the rear brakes and hold the front with button engaged. When i let off the brake pedal with the line lock engaged the brake system warning light illuminates. Maybe using the dash light will work. Again with a manual trans i only use it for the burnout...