Search results for query: *

62-74 A/B/E-Body Rear Lower Shock Washers Mopar | eBay

ebay has them.

I have these. Caution, if your springs are sagging now you will get 4+" of lift. Don't get me wrong, I like them but it was a surprise when they where first installed.

Shop Dodge, Plymouth & Chrysler OEM Replacement Leaf Springs

I think he is asking about a manual steering gear box.

Sorry for not answering your question directly but how about adding a leaf to you existing springs?

Yes I'll get that for you tomorrow.

You can take the screw and poly pad out and insert a Ford type frame bumper. No more slamming, can barely tell it's there.

Rear spring perches? Bolt on. You will want the car on jack stands sitting on the frame.

Agree^^^ Flipping the hanger is not as simple as unbolting it and flipping it over. Are you trying to raise or lower the rear?

:rolleyes: Okay. Can you explain the problem again? Hole is too big that the shock stud goes through and the top rubber bushing goes through the hole? Post a picture?

I don't know how it's going to "push out the bushing" and have a steel sleeve but haven't heard much from the OP anyway.

Check your part # on the shocks. A body shocks should have the same bushing top and bottom. Steel sleeve in the top is incorrect. Check this thread> 8.75 rear end shocks

Another member here was having trouble with the KYB shocks (if that's what you are referring to). Turns out he was sent B body shocks in the A body boxes. Do your shocks have a steel sleeve in the bushing on the top?

Right. Sounds like a few of us do. :D

Glad to hear it!

All measurements are approximate. A - 1" B - 3 1/8" C - 7/8" D- 1 17/32" E - 1 3/4" Not sure but I think these measurements should be the same on all models. Where it sets the spring is what matters. Spring Hangers | AR Engineering Hold on, I see a different reinforcement plate for A and B bodies.

I will measure for you, get back to you soon.

[FOR SALE] - Front Leaf Spring Hanger Brackets

Had them long? Might settle some with a little time. Spring Hangers | AR Engineering This will drop you height 1"+. Got these springs 2.5" higher than stock, put them on and they added at least 4 inches to the old ride height. With those hangers set on the upper hole and some drive time it's...

MP frame connectors on 72 Dart and 65 Coronet. No issues, would buy them again if I needed them.

Careful not to bend the bracket that holds your brake light switch. Took me awhile to figure out what happened after I did that.

Talk to them at General Spring, they can tell you the exact size bit and set you up with all the hardware too.

Shocks for SS springs- P4529514 Stockers are too short.

Moparts on the Web - Main Index I am using a 66 B rear end on a 72 Dart. Moved the perches 1/2" in and custom backspaced wheels.

I'm no expert but I like these. 1964-1976 Dodge & Plymouth Leaf Springs | General Spring Gives it a nice rake.

I know my headers wouldn't have cleared without it. Had Sanderson's before and it was a necessity.

Mopar Universal Joint Adapter - Power Box - FR1506P - 574 - 5367

General Spring | 1964-1976 Plymouth & Dodge Car Leaf Springs