Search results for query: *

Pg classic or Be&a have them up to 3”

Have a look at the pypes web site

Nice! I'm going to run the 3" x pipe to my 2 1/2" mufflers. I will have a 3" straight flow to my electric cut outs. Exhaust will run to the bumper. Street car and call it good. Thanks everyone for the input. Andrew

Interesting, my pypes 2 1/2" Violators flow 453 cfm, and straight 2 1/2" pipe is 500 cfm. What would 511 cubic inch motor need for flow?

Wife likes the dumps. Makes her happy and it's easy since I already have them. Thanks for the input. My 2 1/2" mufflers flow 450cfm. It's should work and the cut outs give me the option. Andrew

Thanks for the posts.

Will I loose any significant power by running a 3" exhaust and reducing it to 2 1/2" after the x-pipe? I will be making over 600hp and it will be difficult to run 3" all the way out to the back. I thought I saw something that mentioned that the first 4' matters most. Thanks Andrew

I like mine.... they are fun out in the back roads and my kids & wife get a kick out of it. Do what you like. "A"

I have the pypes cut outs and they did exactly as jbc mentioned. I called pypes, and they were not helpful. I would a try an alternate brand. Andrew

my friend has a 67 dart and bought the 3" system with the x pipe. He ended up stepping it down to 2 1/2" out to the rear of the car after the x- pipe.

It appears to, It was already in the car when I bought it. The spare tire whell is now flat, but looks factory when the trunk is open.

I ended up taking my system to the local shop and they ended up cutting it all up to get it to fit correctly. They told me that they could have custom built me a better set up for the same money. At the end of the day it cost me $300.00 to have it corrected. I also bought a set of the HYE-10...

I have the street pro Pypes with my TTI's and I like them. Andrew http://170.126.246.4:15871/cgi-bin/blockpage.cgi?ws-session=2013355919

Thanks for the reply, do you happen to know who they are made by? I need a set for a Big Block. I will pass along the information to a friend of mine who has a 340. Andrew

I had fun with mine aswell, no back rub though. I like the valve covers on your motor, what make are they? Andrew

Thanks, here are a few more details of the motor, we bought the short block from Muscle Motors. Andrew 400 Block Comp Cam custom grind solid roller .631 lift in & exh, duration at .020 286 / 292 @.050 250 / 256 110 LSA installed at 105. Valve timing @.050 Int 19 BTDC 51 ABDC EXH 62 BBDC 14...

My friend has the complete system on his 67 SB Dart, and it fits and looks great.

http://www.youtube.com/watch?v=VvIAJmV3RMg 511

Thank you, they are the Pypes street pro mufflers that came with the kit from Summit. Andrew

The kick over the rear end was way off and they did not line up at all with the TTI headers. I probably only used half of the system. The shop told me they could have built the same thing with less cuts for $300.00 CDN (I am not sure if that would have included the mufflers).

Thanks! That's the better part of the summer of 2008 spent in a 10' x 20' garage with countless dollars, lots of frustration and one pissed off girlfriend. The pypes system works well, but it was not a direct bolt on like stated in their ad. I would buy what ever mufflers you like and have your...

Pypes stainless street pro with exhaust are tame until you stomp your foot into it and they are priced right aswell. Here is a link if you are interested with 2 1/2" x pipe. Andrew http://www.youtube.com/watch?v=VvIAJmV3RMg

511 CI stroked 400 400 Block Comp Cam custom grind solid roller .631 lift in & exh, duration at .020 286 / 292 @.050 250 / 256 110 LSA installed at 105. Valve timing @.050 Int 19 BTDC 51 ABDC EXH 62 BBDC 14 ATDC. (spings installed to match 210 seat pressure with 10 degree locks) Forged pistons...

I will be installing mine at the end of this month. TTI 1 3/4 headers, mini tubbed with a B Body gas tank. I expect to have to make a few changes, even though they say there should be no issues. Keep you posted .. ..

Does anyone have a MP484?

http://www.pypesexhaust.com/gallery37.html Here are photos from Pypes website, it looks like you'll have to cut the ends off if you want to use the factory style tips.

Does anyone have a 383 with a MP 484 or 509? Looking to upgrade from my stock cam.

I just ordered a set of Pypes Violator along with TTI's for my 383 Dart. I read on one of the boards that the system was intially designed with a 68 383 Dart with 1 3/4 TTI headers. I wont have time to install them for another month or two, but I'm quite confident everything should fit...