Search results for query: *

well it looks like the throttle valve lever (kickdown arm) didnt really change that much throughout the life of the 727, I pulled one off of a mid 90's Ram van, I had to make a minor modification to it. they changed the way the kickdown cable attaches to the arm. The newer models have a ball on...

may have a throttle lever, went to the local junk yard and went on the hunt. they only stock late model cars, late 80's up. I found a full size ram van that looked similar to the older 727 setup. I did notice that the end of the throttle lever had a ball on the end and a plastic clip that...

Yeah its parked for now, I really wanted to take it out the weekend but I've read up alot from other sites that say the throttle valve lever, (kick down) is esential to the way the 727 shifts. Here is a pic of the ebay listing, again I need the throttle valve lever, I aint too proud to beg...

Thanks for the replies, the oem linkage off the trans for the kick down is gone. I do have the lokar kick down cable but there is nothing on the trans for it to hook up to. Thats my issue right now. I did find one on ebay that I think will work, I'll post a link later tonight for some input as...

I had a shop recently replace a manual reverse valve body and B&M shifter and install a Turbo Action Cheetah forward manual/automatic valve body and a American Shifter. I noticed that the gear selection is really tight but also it seems like I only have either D and 2 or 1 and 2. When out...

Thinking about replacing a b&m shifter and cable and going with the lokar nost shifter. Any reviews? any pics installed? It's going into my demon, it has a bench so I'm concerned with the clearance, thinking about the shortest one available. Or does anyone make a replacement for the factory...

I dont have a pic of the original install. The person I bought it from had a motor built by Koffel but didnt take the time to insulate the trans cable or some of the spark plug wires. He used some Hooker competition headers and the rear drivers side spark plug wires are touching the header, so...

Ok, so I spent roughly an hour in the garage getting it out over last couple nights. When I removed it I pulled on the ends and they still moved freely. The cable is moving in the white sheathing. Is there possibly something wrong with the valve body? I had all gears but the final drive gear...

thanks again, getting it up in the air hopefully after work and pulling the old one out to measure it.

Went to take my wife on her first ride in the demon and I only had 2 gears out of three. Got home crawled underneath the car and tracked my problem to a melted shifter cable, plastic shielding is melted away and I can see the cable, looks frayed too but I can't get a good look between the...