Search results for query: *

PSA "Don't get the Oven Cleaner on you and wear long sleeves and wear safety glasses". I worked for an Aerosol company that made oven cleaner and it will eat your skin. If you already knew this,chive on.

before and after pics?

I took the safety switch off my Ryobi and it was pretty simple. I think my next cordless stuff will be Milwaukee. I need a portable 1/2 drive impact for when I go to the junk yards

My Ryobi sucks,just saying.

Yours looks better than mine. This is my storage garage

I just did mine solo the other day with a standard 2 1/2 ton floor jack and I also have arthritis. I set the flange of the pig just inside the cup and it was a perfect balance but make sure to get the car high enough that the pig on the jack will pass under the axle,springs or through the side...

I'm in the market for one too.

Did you use led bulbs or standard?

Lol,yeah. It has to be from the 50's or 60's and may need some updating

click on the link. It's a westinghouse. It's not mine

(not mine) Cylinder head valve grinder Cylinder head valve grinder $50.00 OBO

Just buy a cheap plow truck

and the tool is expensive. The shop that sells them here call them nutserts

Nice job

I can measure when I pop my pan back off. I think it was 1/4"

I'll send you some bolts if you want to experiment

It sounds doable

soap and water will wash it away

A buddy of mine had softened his engine bay paint with brake cleaner but I think he said he went through a case of it.

I have that same issue. I charge my battery before I leave and by the time I cut 1/4 of the way through a U bolt with a cutting wheel bit it's out of juice and I end up having to use a hacksaw to cut the other 3 which is a PITA. I need to invest in a decent portable drill/saw combo and a 1/2...

Since we are on power tools :). I bought a Ryobi 18V drill/saw combo kit to help when I go to the junk yards but it's the biggest POS I ever bought and never keeps the charge long. I also replaced the battery and ran it to zero with the flashlight and recharged it and same deal. What have you...

It works real good so far and I use different sized wheels. If that don't work I use a bench grinder/wheel. I have redone a LOT of parts for both of my cars this way. I also have a prepainting process as well. I strip off what I need,grab a pair of pliers and spray it off with autozone brake...

I use a 3/8's hand drill with wire wheels mostly

My compressor is an oil less? I got a deal on it

I have the same one and it works pretty good but it sure eats up some air and I have a Crapsman compressor that doesn't like keeping up with it and overheats.

Why not just get a scrub brush on an extendable pole?

It was just a simple weed at one time that could have been pulled by hand that grew into a tree that cost $$$ to remove. I see this a lot here.

I'll have to see if there is one near me. I'm looking for a gas welder for sheet metal work. Any clue how small of wire you can use? It needs to be 0.20- 0.25.

And a vice to hold it while you cut it.