Search results for query: *

I have 15x7's on my 67 with 255/60/15 on the rear and 235/60/15 on the front,steel wheels

I would have done 4"-4.25 backspacing. If you get longer studs you can use a 1/4 spacer

My car with standard 15" steel wheels and dog dish caps

The slotted steel wheels are 80's Diplomat police car wheels

I have seen small bolt rally wheels on neons here and one buddy had a set on his car. I don't know if any mods were needed but they were on there.

Mine are factory steel wheels. The squad wheels are also 4"

Mine are 4"

Yep,that's why you can use lower 1/4 patches and trunk floor ext's from a Duster.

The 67-9 Valiant started the evolution into the Duster for 70 and has the same body lines from the door forward and still has a 108 wheelbase and dash like the 67-9 Valiant. I haven't compared the wheel wells between the two but I have had 275/60/15's on one of my 67's before and I have...

I'd go 6" on the fronts

Yep and you can go at least 255/60/15's on the rear. I have 15x6.5's for my fronts from a diplomat. I will be running 15x5.5 C body wheels on the front of my other car that is manual steering.

IF he didn't use the correct depth lugs it won't tighten up correctly. X2 on the center register.

It looks like you may have a B body axle under your car by how much extra back spacing you have left. I have 15x7's under my Valiant with 255/60/15's with a 4" back space and don't have nearly that much room on the back of my wheel.

My Valiant felt like a low rider with 13's on it and I was always watching out for speed bumps and any other road conditions more. I prefer the 15's it has now

The 7 1/4 is narrower than an 8 3/4

Cragars are chrome and require the same if not more upkeep since the chrome likes to pit,rust and peel off of the cast aluminum in time.

You need to check the backspacing for your car and the wheels

They make them in ALL bolt patterns as far as I know.

They started remaking them which is probably cheaper than restoring a set.

Mopars used a std 9" dog dish,ford used 10"

Your welcome Jamie. I did see a few Darts in the pics.

or post a wanted ad there

50 Mopar cars parts yard

Try Craigslist?

I'd just switch to 14" but even those tire sizes are getting scarce. I'm sure azmopar can hook you up with some wheels reasonable.

There was plenty of room. Take a piece of wood against the drum and measure the outspacing. I had 275/60/15's on it and I think I had more room to the outside still. The 1/4's bow out on Dusters where other cars are straight

Yes they will. I had 15x7's on a 71 Duster with 4" backspace.

Try putting them on bare first before going through the trouble of buying and mounting tires on,just in case. I would put the jack stands under the control arms to mimic the suspension under a load and rotate the wheels back and forth.

Yes,they fit all the way to 86 dodge wheels. The caps are 9"

sent