Search results for query: *

I know it's dirty and probably impossible to tell anything, but i snapped some pics earlier. I'll clean it off in the morning to get a better look.

So after measuring it looks like with the car on flat ground, from the front driver frame rail to the ground is 13.5 inches and the front passenger frame rail to the ground is 14 inches. So 1/2 inch drop from passenger to driver side. The rear spring shackles to the ground were the same height...

I'll do exactly that in the morning and update with my results. I'm also going to grab a couple pics of the torsion bars, the torsion bar mounts, and the adjusters and maybe you guys can catch something that's off.

good point! i will look at that tomorrow as well to see if that could be the case. thanks!

Are you referring to the where the torsion bar mounts through the frame in the middle of the car? Or the torsion bar mount in the K frame? I would think that if the torsion bar itself were broken it should be pretty obvious when i get underneath it. Also, i should obviously measure with the...

i was wondering if it could have been the torsion bars. are you referring to the adjusting bolt that goes through the lower control arm? if so, should i be cranking it up, or letting it off? i think the lean is originating in the front. the back has a very slight lean, but i think it's a...

Ever since I bought my 1969 Barracuda it has had a drivers side lean to it. I thought the front shocks may do the trick, so I just finished the replacement of those, but it doesn't seem to have changed. I'm wondering what else I should be checking for. It's a significant lean. I'll post pics in...