Search results for query: *

Got a 1974 Dart with 360 and 727 fits fine. of course I have floor shifter.

I used the Jeg's 2.5 exhaust kit and their chamber mufflers with cheap summit headers. JEGS Performance Products 30501: Header-Back Dual 2-1/2" Exhaust Kit A-Body | JEGS 555-30220 Mufflers | JEGS

They look just like hooker 5602 headers. https://m.summitracing.com/parts/hok-5602-1hkr I am still interested in them.

There are other ways to cure the coating other than the procedure specified by the manufacturer. Some cure in an oven....but who has a oven that big,powder coaters do. I know of people who have heated them with a heat gun and ir thermometer and did the heat and cool cycled before put on their...

Get hold of cosgig and he will make you one !! Here is a link: http://www.forabodiesonly.com/mopar/showthread.php?t=266403

In Texas as long as it is past the passenger compartment and exits to the rear or sides,you are good to go....it can before the rear axle on a pickup (without a camper) as long as it has turn downs. Here is the written law: 20.15 Exhaust System - Every motor vehicle shall at all times be...

I have a 74 also,It has a flaming river box and milodon pan and you can view my butchery to get them to fit.I just going to use them to break-in the motor and then make some custom headers after that. Here is a link to my (on hold) build,page 2 half way down. Passenger side not to bad just one...

What year Dart and does it have power steering? The Summit ones basically suck on fitment ....

Maybe they hired Harold and He will get right on it ! 2 weeks,1 month,1 year from tomorrow... 525 for a very poor design with no improvement over exhaust manifolds.

OxyAcetylene Welding or Tig...

They do not fit spool mount...I got 1974 dart 318 and Milodon oil pan and I dinged up to fit,just using them to break in motor and will go doug or tti later.... Here is the link to the instructions: http://static.summitracing.com/global/images/instructions/sum-g9040.pdf

I be waiting four years,I never ordered them but was hope someone would sent me some... TXDart