Search results for query: *

thank you I just wanted to know

right off the master mounted to the inner fender before the distribution block

ok thanks that's what I thought

On my 1971 Dodge Demon I did a '73 and up manual disc brake swap. I'm adding a line lock in and I forget on the master cylinder which chamber controls the front brakes. Large? Or small? Thanks.

thank you all for all your help. it actually turned out to be my own stupidity: the calipers were on the wrong sides! whoops, I know I'm an idiot, you're all entitled to one free shot. sorry for wasting your time, thank you again for all your help and imput

thank you all getting ready to takle a tough problem

The funny things is that this was my second master cylinder already. I also plan on trying to separate the individuals systems and bleed them tomorrow. And try to bench bleed the master in the car while tapping the master with a wrench to lodge any residual air bubbles.

they are

why is when my pedal sits for a moment dose it gose to the floor

I have bled the entire system and do have the correct wheel cylinders. I honestly don't know where to start diagnosing the problem. is there anywhere you would reccomend starting? I don't know if it's a lousy master cylinder or what? it sounded like it was supposed to be an easy swap.

1971 Dodge Demon manual 4 wheel drum converted to disc/11" drum. retained original distribution block and using disc brakes off a 73 Dodge Dart with large bolt pattern with calipers flipped and bleeders at highst point on caliper. reman "Advance Auto parts" master cylinder that was bled as...

ok thank you

the lower control arms on the car a 1971 dodge demon are stock 10 inch drum brake, so i was under the assumption that the ball joint it self is larger on 73 models and would not fit in to the 71 control arm is this correct?; because from what you are saying it sounds like i could mount 73 lower...

thanks i already found a pair of 73 lower control arms for 40 bucks is there any thing else i need

would 71 disc brake ball joints work

I was hoping to find out if you machined out the mounting holes on a 71 duster/demon drum lower ball joints to fit the 73 or later spindals bolt holes would this work

I got the spindles today a hundred bucks 4 hours & one broken ball joint fork latter ive got them from Berkly towing and auto salvage check this place out they have all sorts of mopar A B & C bodies mostly a bodies though the guy is wicked decent and will let you walk the yard and is willing to...

thanks

will the manual brake master cylinder from a 73 or later a bodies work on a manual brake set up on a 71 demon with 73 later bbp discs?

I have the opportunity to buy a set of bbp front spinals, A-arms, calipers,metering valve and rotors from an old salvage yard for a hundred dollars the set up is complete unmolested originals so original in fact the upper ball joints still have there ma mopar part numbers. so tell me if its a...