Search results for query: *

That's not a bad deal- the 'donor' cars for these brackets are drying up, and by the time you drive out, find, pull and pay... That's real reasonable.

Forgot to mention, I do have the hardware for the piece. Just in case while swapping you drop/misplace any pieces

Good to know!

Yeah, 2-bbl stuff not so easy to find with the kick-down, throttle cable, and matching exhaust manifold (2-bbl exhaust is slightly larger).

Pulled one off a '79 LeBaron. Has the throttle cable, kickdown, and carb has a rebuilt tag from 2010. EGR has a nice block-off plate. Had a manual throttle cable set-up, but most slant guys install the electric conversion. Exhaust manifold not, repeat NOT, cracked. The diverter is stuck in the...

Believe it would be the stock, nothing special 24:1

Not sure, in a bucket, labeled it weighs about 70 lbs.

$30 is my asking price, located 25-30 miles east of Seattle. Nice piece to have when running headers and or clearance on your small block is an issue for any reason

Out of a '67 2-dr sedan. I am 25-30 miles east of Seattle, my ask is $120 shipped (continental US only). Just cleaned the box, did not see any signs of leakage and not painted. Pitman arm and coupler housing included

Out of a '72 D-100, SB truck. Four pictures and a little bit of humor...my ask is $325, I live outside Seattle about 25-30 miles. http://seattle.craigslist.org/est/pts/3900033018.html

Thinkin'....

Sold!

I just got a chance to look in- I worked last weekend and got a bit of a family 'situation' that may be very bad news for me & the wife (no, not divorce). I have gotten 2 PM's and one is offering to pay the ask and UPS P/U from my front door (which is perfect). I've responded back to both PM's...

Thanks, inertia- I screwed up a couple of those last night. The link inertia has is the gears. I corrected it!

Thanks guys, I straightened that up. My buddy gave me the 650 rating when I asked him about it (over the phone when I initially started looking at it). Appreciate the guidance!

Taken from a '67 two-door sedan http://seattle.craigslist.org/est/pts/3812488266.html

Taken from a '72 shorty, 1/2 ton van powered by a slant six. Very nice gear set, tight and even the gear oil in the axle housing was pretty fresh. Not really interested in shipping, very expensive these days- would be a deal killer unless you had a corporate account or some such...

Taken from a decent performance-build 360. http://seattle.craigslist.org/est/pts/3812465779.html East of Seattle!

Have two small block, 90 degree oil filter adapters for sale. http://seattle.craigslist.org/est/pts/3812479513.html

I'm mulling it over...have 2 '72 vintage 400 with casting numbers of 1.

"Hit me!" -Bump

Playing "The Bump" game!

What era swaybar tabs and k-member?

Thanks Keith!

More pictures

Got in trade awhile back. It is the carb, intake, air cleaner and exhaust manifold. It's been off a vehicle for awhile, would recommend a rebuild on the carb and the 2 outer bolts that bolt the intake and exhaust together are broken (as usual on these). Came off a '76 or '77 manual tranny car...

Yeah, at that price I'll bet somebody can set it in, measure it up, and make a set...great point!

Lower control arms with the tabs for the swaybar links?

Hmmm, may be talking with you on that if it doesn't get grabbed by the mid/end of month...

I've seen a few of them before, but $2400? No joke I can get MPFI for less and with the ethanol content in fuel (and the government pushing for 15% content), that'd be the smarter move. Nothing I own is stock or "Restored," so it doesn't matter.