Search results for query: *

66 is 3+ inches longer and two inches wider in the front. 65 is shorter and narrower in the front.

Thank you gentlemen. I got the rear glass out today all by myself. I was hoping to save the seal, but after messing with it for over an hour, the corners were still too tight, so I had to cut it. It wasn't long afterwards that the glass just pushed out. Thanks again.

Thanks guys. I will try it myself. Sounds easy enough. No way to save the gasket in case I need it?

Can I, as one person, remove the back window on a 66 Valiant myself? I've got one nearby in a junkyard, but I'd have to pull it out myself. Someone tell me how to do it.

My advice is to keep it closer to stock in case you ever need to sell it, the resale value will be much higher.

The metal looks factory to me. The hole in each of them doesn't look factory.

Remove the mud shields on the inside of the fenders and reach up with like a 7/16 socket to remove the emblems. The antenna is also held in place with a large Bolt, but I forget what I used to remove it.

"There are MANY tricks to redoing these Grilles that you will never learn, trust me. Removing the anodizing alone is enough to exhaust you into oblivion. And you will NEVER in a million years get my results." It's a little thing called Pride and the ability to do it yourself. We might not...

66Dvert. Great pics showing all that work. Can I bring my car for you to do? :) I have a good parts car to get the cowl from, but thanks Winston. I just wasn't sure how to cut it all apart. It is tough to do when sitting down.

I have never done this before, but I want to try it myself to keep cost down. My cole vent area is totally rusted out. How do I remove the metal above it, where the windshield wipers go thru, to reach the "hat" area to replace the metal on the cowl floor. Pictures would be a great help. Thanks.

What is the possibility of combining a solid, but stripped 64 Valiant body with a rusted out Valiant wagon roof and tailgate area to get a wagon? Where is the best place to cut and blend the two together? Note, the Wagon is very rusty and has no floor or quarters from the wheel wells down...