Search results for query: *

  1. bbeep71

    Holley 3310 jetting for 360

    The carb is 3310-11. It has a block in front and plate in back. It is totally stock from Holley. The timing is about 20deg. and vacuum is around 10 in. in drive at around 900rpm. The MP electronic dist. has about 14 mech. all in around 2500rpm. I believe the factory pri. jets are 70 with a...
  2. bbeep71

    Holley 3310 jetting for 360

    I have a 66 Cuda with a 360. CompCam 280 Magnum cam and 9.5 compression. The 3310 runs rich(plugs are black) with stock from Holley 3310. The Holley 600 1850 carb on it runs great(plugs not rich) but low on top end power. I would like to run the 3310 for better power. What jets and tuning have...
  3. bbeep71

    Fuel boil off

    Please describe how you added a vapor return system using AKA WIx 33040/41 with 1/4" return port fuel filter. I have this problem with my 71 RR but not with my 66 Barracuda. Thanks 8)
  4. bbeep71

    Learn about EFI at Carlisle

    What time are the seminars? Thanks
  5. bbeep71

    Intake won't bolt on!

    I used the fel- pro gaskets recommended by Edelbrock in the instructions. I ruined the first set because I put sealer on the gaskets and couldn't get the bolts placed in the manifold. I kept trying different bolt holes until I could get all of them placed in the manifold. The final time it was...
  6. bbeep71

    Intake won't bolt on!

    I had the same problem with the air gap on my 66 Cuda with 360. It took 3 sets of gaskets and retrying until I got it to work. On the front and rear of the intake I had to use the cork gaskets plus silicone to seal the ends. Just try positioning the intake with gaskets and remember what order...
  7. bbeep71

    Carb Recommendations needed for my 340

    Hi, I live in RI and have a 66 Barracuda with a 360 modified. I'v had a 3310 and a 600 holley on it with no choke. The car runs quicker with the 3310 but better overall with the holley 600. I prefer the 3310 but the 600 is on it now. Both carbs run OK without using a choke. It just takes...
  8. bbeep71

    Holley 3310-11 carb

    Does anyone know the specs for this carb? jets,pv, shooter, spring ,etc. The holley info only goes up to 3310-7. Thanks
  9. bbeep71

    Premium Fuel?

    The article implied that premium will last longer than regular in the tank before it causes problems. I was wondering if this is true then is premium better in your tank when car is stored for the winter? Also, how long does it last when stored before a problem begins?
  10. bbeep71

    Premium Fuel?

    I was reading an article about the Chevy Volt( be nice) and it said that you have to use premium fuel because the fuel can be in the tank longer than normal. Does premium fuel last longer than regular as far as entanol is concerned?
  11. bbeep71

    600 vs 750 Holley

    I have 66 Cuda with 360 280H magnum cam edelbrock airgap intake. I had both 600 Holley and 3310 Holley on car. It runs better with 600 but was a lot quicker with 3310. The 600 is still on the car but I'm goin to try to tune 3310 on it when I get a another chance. For the street the 600 is...
  12. bbeep71

    Carburetor 101?

    Super Tuning and Modifying Holley Carburators by Dave Emanuel has good info on how carbs work. It's geared towards Holleys but the basic info is the same. Also, lots of info can be found on the internet. Just search for something like "How Carbs Work". 8)
  13. bbeep71

    plug reading

    They look like my plugs. When you say lean it out, what exactly do you mean? I have a Holley 3310 on 360. Thanks
Back
Top