Search results for query: *

I know this is old but I thought I would share the outcome anyway. It was a broken wire to the signal cam and someone ran the tail lights to the brake light switch so the tail lights would come on when the pedal was applied. That's why the were no brake lights with the lights on (same). I...

Sorry for the late reply but this shows the rear speaker control.

I had a broken wire going to my signal switch in the column. You could check the wire going up the column to see if it is powered when the pedal is pushed. If there is power there, check for power on the wire coming back out the column for the brake lights.

I replaced the bulbs and no change. Upon further investigation, it appears there is an issue with the brake lights. I see there is a jumper wire tied into the stop lamp switch wire (white) near the switch. It goes to the tail lamp wire (black) at the bulb. Without it, the brake lights do not...

The bulbs are pretty well rusted into the sockets so I'll give that a try. Thanks!

On my 1967 Dart GT Convertible, the lights all work except the brakes lights do not work when the lights are on. One thing I noticed is the same element lights for brake lights and tail lights. The other element (brighter) lights with the turn signals whether the lights are on or off. Does...

A no cost check is to verify the air gap is not too set too much at the pick up. Try .008".